2 Note

Related Specifications
307507-002 21
Table 9 - Test Condition for Low Side Switch (Powered Digital)
Symbol Parameter Value Units
Vccp Applied Voltage 1.2 max V
Hcontrol Disable High Side Switch 0.0 V
Lcontrol Enable Low Side Switch 1.2 max V
Signal Maximum VOL 200 mV
Signal Load Current Source from Signal to Vccp (Pull Up) 2 mA
Signal
VohTh
Test VOH Threshold Setting
400 mV
Signal VolTh Test VOL Threshold Setting 400 mV
Table 10 - Test Condition for Switch (Un-powered Analog)
Symbol Parameter Value Units
VccpToGnd Vccp Connected To Gnd 0.0 V
HctrlEn Enable High Side Switch 1.2 max V
HctrlDis Disable High Side Switch 0.0 V
LctrlEn Enable Low Side Switch 1.2 max V
LctrlDis Disable Low Side Switch 0.0 V
SigSrcVolt Signal Applied Source Voltage 600 max mV
SigSrcVR Signal Applied Source Voltage Resistance 500 ohm
§