2 Note

Related Specifications
20 307507-002
6 Related Specifications
Operating temperature: Between 10 °C and 50 °C
Electrostatic Discharge (ESD) Environment: Controlled to less than 300 V
Table 7 - Electrical Operating Parameters
Symbol Parameter Value Units
Vccp Applied Voltage (Powered) 0.8 to 1.2 max V
CtrlOnThres Switch On Threshold 300 mV
HctrlEnVih High Switch Enable VIH (Powered)
Vccp + 0.3
max
V
LctrlEnVih Low Switch Enable VIH (Powered)
Vccp to Vccp +
0.3 max
V
CtrlDisVil Switch Disable VIL 0.0 V
CtrlEnVih Switch Enable Voltage(Un-powered) 1.2 max V
Sd(on) Switch Control On To Signal Out Delay (Powered) 20 µs
Sd(off) Switch Control Off To Signal Out Delay (Powered) 20 µs
Rval Resistor Values(Un-Powered) 1K (+/- 5%) ohm
RvalControl
Resistor Value of Eight Control Signals (Un-
Powered)
1k(+5%, -
40%)
ohm
Hid(on) High Switch On Saturation Current 20 mA
Lid(on) High Switch On Saturation Current 26 mA
Table 8 - Test Condition for High Side Switch (Powered Digital)
Symbol Parameter Value Units
Vccp Applied Voltage 1.2 max V
Hcontrol Enable High Side Switch 1.5 max V
Lcontrol Disable Low Side Switch 0.0 V
Signal Minimum VOH 600 mV
Signal Load Current Source from Signal to Ground (Pull Down) 5 mA
Signal
VohTh
Test VOH Threshold Setting 400 mV
Signal VolTh Test VOL Threshold Setting 400 mV