Guide

Platform Design Checklist
R
268 Intel
®
852GM Chipset Platform Design Guide
14.10. FWH Checklist
14.10.1. Resistor Recommendations
Pin Name System
Pull-up/Pull-down
Series
Damping
Notes
9
FGPI[4:0]
100
Ω pull-down to gnd Each signal requires a 100 Ω pull-down resistor.
IC
10 k
Ω pull-down to gnd
RST#
100
Ω
ID[3:0] Signals are recommended to be connected to
test points.
RSVD[5:1] Signals are recommended to be connected to
test points.
NC[8:1] The signals should be left as NC (“Not
Connected”)