Specification Update

Errata
Specification Update
43
AT75. Performance Monitoring Counter MACRO_INSTS.DECODED May Not
Count Some Decoded Instructions
Problem: MACRO_INSTS.DECODED performance monitoring counter (Event 0AAH,
Umask 01H) counts the number of macro instructions decoded, but not
necessarily retired. The event is undercounted when the decoded
instructions are a complete loop iteration that is decoded in one cycle and the
loop is streamed by the LSD (Loop Stream Detector), as described in the
Optimizing the Front End section of the Intel® 64 and IA-32 Architectures
Optimization Reference Manual.
Implication: The count value returned by the performance monitoring counter
MACRO_INST.DECODED may be lower than expected. The degree of
undercounting is dependent on the occurrence of loop iterations that are
decoded in one cycle and whether the loop is streamed by the LSD while the
counter is active.
Workaround: None identified.
Status: For the steppings affected, see the Summary Tables of Changes.
AT76. Performance Monitoring Event SIMD_UOP_TYPE_EXEC.MUL is
Counted Incorrectly for PMULUDQ Instruction
Problem: Performance Monitoring Event SIMD_UOP_TYPE_EXEC.MUL (Event select
0B3H, Umask 01H) counts the number of SIMD packed multiply micro-ops
executed. The count for PMULUDQ micro-ops may be lower than expected.
No other instruction is affected.
Implication: The count value returned by the performance monitoring event
SIMD_UOP_TYPE_EXEC.MUL may be lower than expected. The degree of
undercount depends on actual occurrences of PMULUDQ instructions, while
the counter is active.
Workaround: None identified.
Status: For the steppings affected, see the Summary Tables of Changes.