Intel Celeron Processor in the 478-Pin Package at 1.80 GHz Datasheet

Datasheet 89

Intel

Celeron

Processor in the 478-Pin Package

8.0 Boxed Processor Specifications

The Celeron processor in the 478-pin package will also be offered as an Intel boxed processor. Intel

boxed processors are intended for system integrators who build systems from motherboards and

standard components. The boxed Celeron

processor in the 478-pin package will be supplied with a

cooling solution. This chapter documents motherboard and system requirements for the cooling

solution that will be supplied with the boxed Celeron

processor in the 478-pin package. This

chapter is particularly important for OEMs that manufacture motherboards for system integrators.

Unless otherwise noted, all figures in this chapter are dimensioned in millimeters and inches [in

brackets]. Figure 33 shows a mechanical representation of a boxed Celeron

processor in the

478-pin package.

Note: Drawings in this section reflect only the specifications on the Intel boxed processor product. These

dimensions should not be used as a generic keep-out zone for all cooling solutions. It is the system

designer’s responsibility to consider their proprietary cooling solution when designing to the

required keep-out zone on their system platform and chassis. Refer to the

Intel

Pentium

4 Processor in the 478-pin Package Thermal Design Guidelines for further

guidance. Contact your local Intel Sales Representative for this document.

NOTE: The airflow of the fan heatsink is into the center and out of the sides of the fan heatsink.

Figure 33. Mechanical Representation of the Boxed Intel

Celeron

Processor in the 478-Pin

Package