Product Data Sheet / Brochure
Table Of Contents
- 1 Product Description
- 1.1 Overview
- 1.2 Online Support
- 1.3 Processor
- 1.4 System Memory
- 1.5 Processor Graphics Subsystem
- 1.5.1 Integrated Graphics
- 1.5.1.1 Intel® Ultra High Definition (Intel® UHD) Graphics
- 1.5.1.2 Video Memory Allocation
- 1.5.1.3 High Definition Multimedia Interface* (HDMI*)
- 1.5.1.4 DisplayPort* via USB Type-C
- 1.5.1.5 Multiple DisplayPort and HDMI Configurations
- 1.5.1.6 High-bandwidth Digital Content Protection (HDCP)
- 1.5.1.7 Integrated Audio Provided by the HDMI and USB Type C Interfaces
- 1.5.1 Integrated Graphics
- 1.6 USB
- 1.7 SATA Interface
- 1.8 Thunderbolt 3
- 1.9 Real-Time Clock Subsystem
- 1.10 Audio Subsystem†
- 1.11 LAN Subsystem
- 1.12 Hardware Management Subsystem
- 1.13 Power Management
- 1.14 Intel Platform Security Technologies
- 2 Technical Reference
- 2.1 Memory Resources
- 2.2 Connectors and Headers
- 2.2.1 Front Panel Connectors
- 2.2.2 Back Panel Connectors
- 2.2.3 Headers and Connectors (Top)
- 2.2.4 Connectors and Headers (Bottom)
- 2.2.4.1 Signal Tables for the Connectors and Headers
- 2.2.4.2 Add-in Card Connectors
- 2.2.4.3
- 2.2.4.4 USB Type C connector
- 2.2.4.5 Front Panel Header (2.0 mm Pitch)
- 2.2.4.6 SDXC Card Reader
- 2.2.4.7 Power Supply Connector
- 2.2.4.8 Internal USB 2.0 Single-Port Header (1.25 mm Pitch)
- 2.2.4.9 Consumer Infrared (CIR) Sensor
- 2.2.4.10 Consumer Electronics Control (CEC) Header
- 2.2.4.11 RGB LED
- 2.2.4.12 Digital Microphone Array†
- 2.3 BIOS Security Jumper
- 2.4 Mechanical Considerations
- 2.5 Electrical Considerations
- 2.6 Thermal Considerations
- 2.7 Reliability
- 2.8 Environmental
- 3 Overview of BIOS Features
- 4 Error Messages and Blink Codes
- 5 Intel NUC Kit Features
Technical Reference
34
Table 27. BIOS Security Jumper Settings
Function/Mode Jumper
Setting
Configuration
Normal
1-2
The BIOS uses current configuration information and passwords for booting.
Lockdown 2-3 The BIOS uses current configuration information and passwords for booting, except:
• All POST Hotkeys are suppressed (prompts are not displayed and keys are not accepted. For
example, F2 for Setup, F10 for the Boot Menu).
• Power Button Menu is not available (see Section 3.7.4 Power Button Menu).
BIOS updates are not available except for automatic Recovery due to flash corruption.
Configuration
None
BIOS Recovery Update process if a matching *.bio file is found. Recovery Update can be cancelled
by pressing the Esc key.
If the Recovery Update was cancelled or a matching *.bio file was not found, a Config Menu will be
displayed. The Config Menu consists of the following options:
[1] Suppress this menu until the BIOS Security Jumper is replaced.
[2] Clear BIOS User and Supervisor Passwords.
[3] Clear Trusted Platform Module
Warning: Data encrypted with the TPM will no longer be accessible if the TPM is cleared
[4] Disable Privacy MSR Bit (Clear MSR C80[0] to 0)
[5] Enable Privacy MSR Bit (Set MSR C80[0] to 1)
[F2] Intel® Visual BIOS
[F4] BIOS Recovery