Product Data Sheet / Brochure
Table Of Contents
- 1 Product Description
- 1.1 Overview
- 1.2 Online Support
- 1.3 Processor
- 1.4 System Memory
- 1.5 Processor Graphics Subsystem
- 1.5.1 Integrated Graphics
- 1.5.1.1 Intel® Ultra High Definition (Intel® UHD) Graphics
- 1.5.1.2 Video Memory Allocation
- 1.5.1.3 High Definition Multimedia Interface* (HDMI*)
- 1.5.1.4 DisplayPort* via USB Type-C
- 1.5.1.5 Multiple DisplayPort and HDMI Configurations
- 1.5.1.6 High-bandwidth Digital Content Protection (HDCP)
- 1.5.1.7 Integrated Audio Provided by the HDMI and USB Type C Interfaces
- 1.5.1 Integrated Graphics
- 1.6 USB
- 1.7 SATA Interface
- 1.8 Thunderbolt 3
- 1.9 Real-Time Clock Subsystem
- 1.10 Audio Subsystem†
- 1.11 LAN Subsystem
- 1.12 Hardware Management Subsystem
- 1.13 Power Management
- 1.14 Intel Platform Security Technologies
- 2 Technical Reference
- 2.1 Memory Resources
- 2.2 Connectors and Headers
- 2.2.1 Front Panel Connectors
- 2.2.2 Back Panel Connectors
- 2.2.3 Headers and Connectors (Top)
- 2.2.4 Connectors and Headers (Bottom)
- 2.2.4.1 Signal Tables for the Connectors and Headers
- 2.2.4.2 Add-in Card Connectors
- 2.2.4.3
- 2.2.4.4 USB Type C connector
- 2.2.4.5 Front Panel Header (2.0 mm Pitch)
- 2.2.4.6 SDXC Card Reader
- 2.2.4.7 Power Supply Connector
- 2.2.4.8 Internal USB 2.0 Single-Port Header (1.25 mm Pitch)
- 2.2.4.9 Consumer Infrared (CIR) Sensor
- 2.2.4.10 Consumer Electronics Control (CEC) Header
- 2.2.4.11 RGB LED
- 2.2.4.12 Digital Microphone Array†
- 2.3 BIOS Security Jumper
- 2.4 Mechanical Considerations
- 2.5 Electrical Considerations
- 2.6 Thermal Considerations
- 2.7 Reliability
- 2.8 Environmental
- 3 Overview of BIOS Features
- 4 Error Messages and Blink Codes
- 5 Intel NUC Kit Features
Technical Reference
27
NOTES
Connector is Aces part number 50273-0047C-002, 1.25 mm pitch header, surface mount, vertical,
lead-free, 4 circuits.
†
DMIC array connector appears on select models only. See Board and Product Identification
pages in the foreword section.
Table 18. RGB LED Connector (1.25 mm Pitch)
Pin
Signal Name
1
+3VSB
2
Red HDD LED
3
Green HDD LED
4
Blue HDD LED
See section 2.2.4.11 for more information on the RGB LED connector.
NOTE
Connector is Aces part number 50273-0047C-002, 1.25 mm pitch header, surface mount, vertical,
lead-free, 4 circuits.
Table 19. CEC Header (1.25 mm pitch)
Pin
Signal Name
1
+5 V Standby (5VSB)
2
Ground (GND)
3
Power Switch (CEC_PWR)
4
HDMI CEC (HDMI_CEC)
See section 0 for more information on the CEC header.
NOTE
Connector is Aces part number 50273-0047C-002, 1.25 mm pitch header, surface mount, vertical,
lead-free, 4 circuits.
2.2.4.2 Add-in Card Connectors
The board supports M.2 2242 and 2280 (key type M) modules.
• Supports M.2 SSD SATA drives
Maximum bandwidth is approximately 540 MBps
• Supports M.2 SSD Gen 3 PCIe AHCI and NVMe drives (PCIe x1, x2, and x4)
Using PCIe x4 M.2 SSD maximum bandwidth is approximately 4000 MBps