Product Data Sheet / Brochure
Table Of Contents
- 1 Product Description
- 1.1 Overview
- 1.2 Online Support
- 1.3 Processor
- 1.4 System Memory
- 1.5 Processor Graphics Subsystem
- 1.5.1 Integrated Graphics
- 1.5.1.1 Intel® Ultra High Definition (Intel® UHD) Graphics
- 1.5.1.2 Video Memory Allocation
- 1.5.1.3 High Definition Multimedia Interface* (HDMI*)
- 1.5.1.4 DisplayPort* via USB Type-C
- 1.5.1.5 Multiple DisplayPort and HDMI Configurations
- 1.5.1.6 High-bandwidth Digital Content Protection (HDCP)
- 1.5.1.7 Integrated Audio Provided by the HDMI and USB Type C Interfaces
- 1.5.1 Integrated Graphics
- 1.6 USB
- 1.7 SATA Interface
- 1.8 Thunderbolt 3
- 1.9 Real-Time Clock Subsystem
- 1.10 Audio Subsystem†
- 1.11 LAN Subsystem
- 1.12 Hardware Management Subsystem
- 1.13 Power Management
- 1.14 Intel Platform Security Technologies
- 2 Technical Reference
- 2.1 Memory Resources
- 2.2 Connectors and Headers
- 2.2.1 Front Panel Connectors
- 2.2.2 Back Panel Connectors
- 2.2.3 Headers and Connectors (Top)
- 2.2.4 Connectors and Headers (Bottom)
- 2.2.4.1 Signal Tables for the Connectors and Headers
- 2.2.4.2 Add-in Card Connectors
- 2.2.4.3
- 2.2.4.4 USB Type C connector
- 2.2.4.5 Front Panel Header (2.0 mm Pitch)
- 2.2.4.6 SDXC Card Reader
- 2.2.4.7 Power Supply Connector
- 2.2.4.8 Internal USB 2.0 Single-Port Header (1.25 mm Pitch)
- 2.2.4.9 Consumer Infrared (CIR) Sensor
- 2.2.4.10 Consumer Electronics Control (CEC) Header
- 2.2.4.11 RGB LED
- 2.2.4.12 Digital Microphone Array†
- 2.3 BIOS Security Jumper
- 2.4 Mechanical Considerations
- 2.5 Electrical Considerations
- 2.6 Thermal Considerations
- 2.7 Reliability
- 2.8 Environmental
- 3 Overview of BIOS Features
- 4 Error Messages and Blink Codes
- 5 Intel NUC Kit Features
Technical Reference
25
2.2.4.1 Signal Tables for the Connectors and Headers
Table 14. SATA Data/Power Connector (0.5 mm pitch ZIF)
Pin
Signal Name
Pin
Signal Name
1
+5 V
2
+5 V
3
+5 V
4
+5 V
5
NC
6
NC
7
NC
8
DEVSLP
9
GND
10
GND
11
SATA_RX_P
12
SATA_RX_N
13
GND
14
SATA_TX_N
15
SATA_TX_P
16
GND
NOTE
Connector is Entery 6700K-J16N-00L, FPC 16 pin 0.5mm pitch SMT.
Table 15. Single-Port Internal USB 2.0 Header (1.25 mm pitch)
Pin
Signal Name
Pin
Signal Name
1
+5 V DC
2
D-
3 D+ 4 Ground
See section 2.2.4.8 for more information on USB 2.0 headers.
NOTE
Connector is Molex part number 53398-0471, 1.25 mm pitch PicoBlade header, surface mount,
vertical, lead-free, 4 circuits.
Table 16. M.2 2280 Module (key type M) Connector
Pin
Signal Name
Pin
Signal Name
74
3.3V
75
GND
72
3.3V
73
GND
70 3.3V 71 GND
68 SUSCLK(32kHz) (O)(0/3.3V) 69 PEDET (NC-PCIe/GND-SATA)
66
Connector Key
67
N/C
64
Connector Key
65
Connector Key
62
Connector Key
63
Connector Key
60
Connector Key
61
Connector Key
58
N/C
59
Connector Key
56 N/C 57 GND
continued