Product Data Sheet / Brochure

System Memory
2
NOTE
To be fully compliant with all applicable DDR SDRAM memory specifications, the board should be
populated with SO-DIMMs that support the Serial Presence Detect (SPD) data structure. This
allows the BIOS to read the SPD data and program the chipset to accurately configure memory
settings for optimum performance. If non-SPD memory is installed, the BIOS will attempt to
correctly configure the memory settings, but performance and reliability may be impacted or the
SO-DIMMs may not function under the determined frequency.
NOTE
Intel NUC Boards NUC10i3FNB, NUC10i5FNB and NUC10i7FNB support only 8 Gb and 16 Gb
memory technologies (also referred to as “SDRAM density”). Table 4 lists the supported SO-DIMM
configurations.
Table 4. Supported Memory Configurations
SO-DIMM
Capacity
SDRAM
Density
SDRAM Organization
Ranks
Number of SDRAM Devices
4096 MB
8 Gbit
512 M x16
1
4
8192 MB
8 Gbit
1024 M x8
1
8
8192 MB
16 Gbit
1024 M x16
1
4
16384 MB
8 Gbit
1024 M X8
2
16
16384 MB
16 Gbit
2048 M X8
1
8
32768 MB
16 Gbit
2048 M x8
2
16
For information about…
Refer to:
Tested Memory
http://compatibleproducts.intel.com/
Figure 4 illustrates the memory channel and SO-DIMM configuration.
Figure 4. Memory Channel and SO-DIMM Configuration