Product Data Sheet / Brochure
Table Of Contents
- 1 Product Description
- 1.1 Overview
- 1.2 Online Support
- 1.3 Processor
- 1.4 System Memory
- 1.5 Processor Graphics Subsystem
- 1.5.1 Integrated Graphics
- 1.5.1.1 Intel® Ultra High Definition (Intel® UHD) Graphics
- 1.5.1.2 Video Memory Allocation
- 1.5.1.3 High Definition Multimedia Interface* (HDMI*)
- 1.5.1.4 DisplayPort* via USB Type-C
- 1.5.1.5 Multiple DisplayPort and HDMI Configurations
- 1.5.1.6 High-bandwidth Digital Content Protection (HDCP)
- 1.5.1.7 Integrated Audio Provided by the HDMI and USB Type C Interfaces
- 1.5.1 Integrated Graphics
- 1.6 USB
- 1.7 SATA Interface
- 1.8 Thunderbolt 3
- 1.9 Real-Time Clock Subsystem
- 1.10 Audio Subsystem†
- 1.11 LAN Subsystem
- 1.12 Hardware Management Subsystem
- 1.13 Power Management
- 1.14 Intel Platform Security Technologies
- 2 Technical Reference
- 2.1 Memory Resources
- 2.2 Connectors and Headers
- 2.2.1 Front Panel Connectors
- 2.2.2 Back Panel Connectors
- 2.2.3 Headers and Connectors (Top)
- 2.2.4 Connectors and Headers (Bottom)
- 2.2.4.1 Signal Tables for the Connectors and Headers
- 2.2.4.2 Add-in Card Connectors
- 2.2.4.3
- 2.2.4.4 USB Type C connector
- 2.2.4.5 Front Panel Header (2.0 mm Pitch)
- 2.2.4.6 SDXC Card Reader
- 2.2.4.7 Power Supply Connector
- 2.2.4.8 Internal USB 2.0 Single-Port Header (1.25 mm Pitch)
- 2.2.4.9 Consumer Infrared (CIR) Sensor
- 2.2.4.10 Consumer Electronics Control (CEC) Header
- 2.2.4.11 RGB LED
- 2.2.4.12 Digital Microphone Array†
- 2.3 BIOS Security Jumper
- 2.4 Mechanical Considerations
- 2.5 Electrical Considerations
- 2.6 Thermal Considerations
- 2.7 Reliability
- 2.8 Environmental
- 3 Overview of BIOS Features
- 4 Error Messages and Blink Codes
- 5 Intel NUC Kit Features
Product Description
2
Table 1. Feature Summary (continued)
Peripheral Interfaces
• USB 3.1 (Gen 2/10 Gbps) Type C ports:
• One port is implemented via the external front panel Type C connector
• One port is implemented via the external back panel Type C connector
• USB 3.1 (Gen 2/10 Gbps) Type A ports:
• One port is implemented via the external front panel connectors (blue)
• Two ports are implemented via the external back panel connectors (blue)
• USB 2.0 ports:
• Two ports via two single-port internal 1x4 1.25 mm pitch headers (white)
• One port is reserved for the NGFF 1216 Wireless module Bluetooth capability
• Consumer Infrared (CIR)
Expansion Capabilities
• One M.2 connector supporting M.2 2242 and M.2 2280 (key type M) modules
• One Standard SDXC slot
• One Thunderbolt™ 3 via back panel USB Type C connector
BIOS
• Intel
®
BIOS resident in the Serial Peripheral Interface (SPI) Flash device
• Support for Advanced Configuration and Power Interface (ACPI), Plug and Play, System
Management BIOS (SMBIOS), and Modern Standby
Instantly Available PC
Technology
• Suspend to RAM support
• Wake on PCI Express, LAN, front panel, CIR, and USB ports
• Microsoft Modern Standby
LAN
Gigabit (10/100/1000 Mbps) LAN subsystem using the Intel® I219V Gigabit Ethernet
Controller
Hardware Monitor
Subsystem
Hardware monitoring subsystem, based on an embedded controller, including:
• Voltage sense to detect out of range power supply voltages
• Thermal sense to detect out of range thermal values
• One processor fan header
• Fan sense input used to monitor fan activity
• Fan speed control
Wireless
• Intel® Wi-Fi 6 AX201, 802.11ax, Dual Band, 2x2 Wi-Fi + Bluetooth 5
• Maximum Transfer speed up to 2.4 Gbps
• Next Generation Form Factor (NGFF) 12x16 soldered-down package
• Supports OFDMA, 1024QAM, Target Wake Time (TWT) and spatial reuse
Notes:
†
Please refer to Table 4. Supported Memory Configurations for additional information about supported memory
configurations.
††
On select models only. See Board and Product Identification pages in the foreword section.