Specification Sheet

Datasheet, Volume 1 of 2 93
Thermal Management
5.3.1 Thermal Profile for PCG 2015D Processor
Notes:
1. Digital Thermal Sensor (DTS) based fan speed control is recommended to achieve op
timal
t
hermal performance.
2. Intel recommends full cooling capability at approximately the DTS value of -1, to minimi
ze
T
CC activation risk.
3. For example, if T
CONTROL
= 20 ºC, Fan acceleration operation will start at 80 ºC
(100 ºC - 20 ºC).
Figure 5-2. Thermal Test Vehicle Thermal Profile for PCG 2015D Processor
Notes:
1. Refer to Tab l e 5- 5 for discrete points that constitute the thermal profile.
Table 5-5. Thermal Test Vehicle Thermal Profile for PCG 2015D Processor (Sheet 1 of 2)
Power (W) T
CASE_MAX
(C) Power (W) T
CASE_MAX
(C)
0 43.7 46 53.8
2 44.1 48 54.3
4 44.6 50 54.7
6 45.0 52 55.1
8 45.6 54 55.6
10 45.9 56 56.0
12 46.3 58 56.5
14 46.8 60 56.9
16 47.2 62 57.3
18 47.7 64 57.8
20 48.1 66 58.2
22 48.5 68 58.7
24 49.0 70 59.1
26 49.4 72 59.5
28 49.9 74 60.0
30 50.3 76 60.4
Table 5-4. T
CONTROL
Offset Configuration (S-Processor Line - Client) (Sheet 2 of 2)
Segment Hexa Core GT2 Quad Core GT2