Specification Sheet

Electrical Specifications
46 Datasheet, Volume 1 of 2
5.4 Absolute Maximum and Minimum Ratings
The following table specifies absolute maximum and minimum ratings. At conditions
outside functional operation condition limits, but within absolute maximum and
minimum ratings, neither functionality nor long-term reliability can be expected. If a
device is returned to conditions within functional operation limits after having been
subjected to conditions outside these limits, but within the absolute maximum and
minimum ratings, the device may be functional, but with its lifetime degraded
depending on exposure to conditions exceeding the functional operation condition
limits.
Although the processor contains protective circuitry to resist damage from Electro-
Static Discharge (ESD), precautions should always be taken to avoid high static
voltages or electric fields.
5.4.1 Storage Conditions Specifications
Environmental storage condition limits define the temperature and relative humidity
limits to which the device is exposed to while being stored in a Moisture Barrier Bag.
The specified storage conditions are for component level prior to board attach (see
notes in the following table for post board attach limits).
The following table specifies absolute maximum and minimum storage temperature
limits which represent the maximum or minimum device condition beyond which
damage, latent or otherwise, may occur. The table also specifies sustained storage
temperature, relative humidity, and time-duration limits. These limits specify the
Enable Intel Trusted Execution Technology (Intel TXT) Agent TXT_AGENT 3
Enable Safe Mode Boot SAFE_MODE_BOOT 3
Configure Socket ID SOCKET_ID[1:0] 3
Enable legacy socket boot LEGACY_SKT 3
Notes:
1. Output tri-state option enables Fault Resilient Booting (FRB), for FRB details, see the Fault Resilient
Booting (FRB) Section. The signal used to latch PROCDIS_N for enabling FRB mode is RESET_N.
2. BIST_ENABLE is sampled at RESET_N de-assertion
3. This signal is sampled after PWRGOOD assertion.
Table 5-8. Power-On Configuration Option Lands (Sheet 2 of 2)
Configuration Option Land Name Notes
Table 5-9. Processor Absolute Minimum and Maximum Ratings
Symbol Parameter Min Max Unit
V
CCIN Processor input voltage with respect to Vss -0.3 2.15 V
V
CCD Processor IO supply voltage for DDR4
(standard voltage) with respect to V
SS
-0.3 1.35 V
V
CCIO IO voltage supply input with respect to V
SS
-0.3 1.35 V
V
CCSA IO voltage supply input with respect to V
SS
-0.3 1.35 V
Notes:
1. For functional operation, all processor electrical, signal quality, mechanical, and thermal specifications
must be satisfied.
2. Excessive Overshoot or undershoot on any signal will likely result in permanent damage to the processor.