User's Manual

Intel
®
Ambler Module With Bluetooth* Wireless Technology
Design Guide, Rev. 4.1
SC-3216 Intel Secret 11
R
Overview of Bluetooth Qualification
Responsible Entity
The manufacturer of a Bluetooth

“end-product” is ultimately responsible for qualification of the
product. An OEM who uses the Intel Personal Wireless Module(Ambler) component in their end-
product must follow the steps defined in the Qualification Program Reference Document (PRD) to
fulfill the qualification requirements. Since the Intel Personal Wireless Module(Ambler) component
is pre-tested and qualified for a specific covered functionality, it may be used to fulfill most of the
testing requirements of the qualification program simply by reference to the Intel Personal Wireless
Module(Ambler) component. You will not be required to perform conformance testing since you are
using a pre-qualified Intel Personal Wireless Module(Ambler) how ever you must perform the
Interopertability tests specified for the profiles supported.
Steps to Qualification - Overview
The steps to qualify a product incorporating Bluetooth

technology are listed below for reference. It
is encouraged for an OEM to review Section 5.0 of the Bluetooth

Qualification Program Reference
Document (PRD), which outlines these steps in detail. All of the required documentation and forms
can be found on the Bluetooth Member web site: http://www.opengroup.org/bluetooth/ .
Overview of Steps for qualification
1. Join the Bluetooth Special Interest Group through the process described on the Bluetooth public
WEB site http://www.bluetooth.com/
. Intel should be listed as the Sponsor if necessary.
2. Establish a relationship with a Bluetooth Qualification Body (BQB). These individuals and their
contact information can be found on the Bluetooth public WEB site. This is a requirement of the
qualification program. BQB list can be found on the Bluetooth public Website
http://qualweb.opengroup.org/Template.cfm?LinkQualified=ListBQB
.
3. Fill out a Declaration of Compliance for the end product that is to be qualified. This form can be
found on the Bluetooth Member Web Site.
4. Prepare a test plan for submission to the BQB. The test plan should indicate that the end product
will utilize a pre-tested Bluetooth
Integrated Component (Intel Personal Wireless Module(Ambler)
component) to satisfy the conformance testing associated with the covered functionality inherent
in the Intel Personal Wireless Module(Ambler) component. Intel will provide a template to assist
you in creating this document.
5. Perform Profile Interoperability tests. . Below are listed the required interoperability tests for the
Intel Personal Wireless Module(Ambler) supported functionality (subjected to change based on
final software release). Intel will provide the required information to perform interoperability tests
for the system integrating Personal Wireless Module(Ambler). Please engage with your BQB now
and start planning (resources and time) for the interoperability tests to get your platform qualified
and listed.
Table CSDAP
Table DDUN
Table EFAX