Specification Sheet

Intel Compute Stick STK2M3W64CC, STK2MV64CC and STK2M364CC Technical Product Specification

3.7.2 BIOS POST Hotkeys

The following hot keys are supported during boot.

[F2] Enter BIOS Setup

[F7] Update BIOS

[F8] Activate Windows Recovery Mode

[F10] Enter Boot Menu

3.7.3 Changing the Default Boot Device During POST

Pressing the <F10> key during POST causes a boot device menu to be displayed. This menu

displays the list of available boot devices. Table 9 lists the boot device menu options.

Table 9. Boot Device Menu Options

Boot Device Menu Function Keys Description

↑

> or <

↓

> Selects a default boot device

<Enter> Exits the menu, and boots from the selected device

<Esc> Exits the menu and boots according to the boot priority defined

through BIOS setup

3.7.4 Power Button Menu

The Power Button Menu is accessible via the following sequence:

1. System is in S4/S5 (not G3)

2. User pushes the power button and holds it down for approximately 3 seconds

3. Release immediately

4. User releases the power button before the 4-second shutdown override

If this boot path is taken, the BIOS will use default settings, ignoring settings in VPD where

possible.

At the point where Setup Entry/Boot would be in the normal boot path, the BIOS will display the

following prompt and wait for a keystroke:

[ESC] Normal Boot

[3] Reset Intel® AMT/Standard Manageability to default factory settings

[4] Clear Trusted Platform Module (Warning: Data encryption with the TPM will no longer be

accessible if the TPM is cleared)

[F2] Intel BIOS

[F4] BIOS Recovery

[F7] Update BIOS

[F10] Enter Boot Menu