Specification Sheet

Product Description
15
1.11.1.1 System States and Power States
Under ACPI, the operating system directs all system and device power state transitions. The
operating system puts devices in and out of low-power states based on user preferences and
knowledge of how devices are being used by applications. Devices that are not being used can be
turned off. The operating system uses information from applications and user settings to put the
system as a whole into a low-power state.
Table 4 lists the power states supported by the Compute Stick along with the associated system
power targets. See the ACPI specification for a complete description of the various system and
power states.
Table 4. Power States and Targeted System Power
Global States Sleeping States Processor States Device States
Targeted System
Power
(Note 1)
G0 – working
state
S0 – working C0 – working D0 – working state. Full power
G1 – sleeping
state
S3 – Suspend to RAM.
Context saved to
RAM.
No power D3 – no power
except for wake-up
logic.
Power < 5 W
(Note 2)
G1 – sleeping
state
S4 – Suspend to disk.
Context saved to disk.
No power D3 – no power
except for wake-up
logic.
Power < 5 W
(Note 2)
G2/S5 S5 – Soft off. Context
not saved. Cold boot
is required.
No power D3 – no power
except for wake-up
logic.
Power < 5 W
(Note 2)
G3 – mechanical
off
AC power is
disconnected
from the
computer.
No power to the
system.
No power D3 – no power for
wake-up logic.
No power to the system.
Service can be performed
safely.
Notes:
1. Total system power is dependent on the system configuration and peripherals powered by the system power supply.
2. Dependent on the standby power consumption of wake-up devices used in the system.