users manual

User Guide for NUC8i3CYSM, NUC8i3CYSN
5
Changing an M.2 SSD or Intel® Optane™ Memory Module
The Intel NUC Kits
NUC8i3CYSM
and
NUC8i3CYSN
support an 80mm SSD.
Find compatible M.2 SSDs in the Intel Product Compatibility Tool
• NUC8i3CYSM
• NUC8i3CYSN
To Change an M.2 SSD:
1. Remove the small silver screw from the 80mm metal standoff on the board (A).
2. Remove the SSD/Intel Optane Memory from the connector if there is one installed.
3. Align the space at the bottom of the new M.2 SSD to the key on the connector.
4. Insert the bottom edge of the M.2 SSD into the connector (B).
5. Secure the card to the standoff with the small silver screw (C).