users manual

User Guide for NUC8i3CYSM, NUC8i3CYSN

Changing a 2.5” Hard Drive or SSD

The Intel NUC Kits

NUC8i3CYSM

and

NUC8i3CYSN

have pre-installed 2.5” Hard Disk Drive (HDD).

Find compatible 2.5” drives in the Intel Product Compatibility Tool:

• NUC8i3CYSM

• NUC8i3CYSN

1. Unscrew the 4 screws holding the current drive in the bay.

2. Remove the pre-installed drive from the drive bay.

3. Slide the new 2.5” drive into the drive bay, ensuring the SATA connectors are fully seated into the

connectors of the SATA daughter card (A).

4. Secure the drive into the drive bay with the four screws that were used in step 1. Set the drive bay

bracket down inside the chassis (C).