User manual

Intel NUC Board NUC6i5SYB and Intel NUC Board NUC6i3SYB Technical Product Specification

1.12.1.2 Wake-up Devices and Events

Table 11 lists the devices or specific events that can wake the computer from specific states.

Table 11. Wake-up Devices and Events

Devices/events that wake up the system… …from this sleep state Comments

Power switch S3, S4, S5

RTC alarm S3, S4, S5

Monitor to remain in sleep state

LAN S3, S4, S5

1, 3

“S5 WOL after G3” must be supported;

monitor to remain in sleep state

USB S3, S4, S5

1, 2, 3

Wake S4, S5 controlled by BIOS option

(not after G3)

WAKE# S3, S4

Via WAKE; monitor to remain in sleep

state

Consumer IR

S3, S4, S5

1, 3

Will not wake when in Deep S4/S5 sleep

state

Bluetooth N/A Wake from Bluetooth is not supported

Notes:

1. S4 implies operating system support only.

2. Will not wake from Deep S4/S5. USB S4/S5 Power is controlled by BIOS. USB S5 wake is controlled by BIOS. USB S4

wake is controlled by OS driver, not just BIOS option.

3. Windows 8.1 Fast startup will block wake from LAN, USB, and CIR from S5.

NOTE

Wake from S5 for Bluetooth requires additional operating system configuration. Please see

Microsoft Support article at

https://msdn.microsoft.com/en-us/library/windows/hardware/dn133849(v=vs.85).aspx

NOTE

The use of these wake-up events from an ACPI state requires an operating system that provides

full ACPI support. In addition, software, drivers, and peripherals must fully support ACPI wake

events.