User manual

Intel NUC Board NUC6i5SYB and Intel NUC Board NUC6i3SYB Technical Product Specification

1.10.4 Wireless Network Module

The Intel Dual Band Wireless-AC 8260 module provides hi-speed wireless connectivity provided

with the following capabilities:

• Compliant IEEE 802.11abgn, 802.11ac, 802.11d, 802.11e, 802.11i, 802.11h, 802.11w

specifications

• Maximum bandwidth of 867 Mbps

• Dual Mode Bluetooth* 4.0

• OS certified with : Microsoft Windows 7, Microsoft Windows 8.1, Microsoft Windows 10, Linux*

(most features not available on Linux)

• Wi-Fi Direct* for peer to peer device connections

• Wi-Fi Miracast Source

• Wi-Fi Direct for peer to peer device connections

• Authentication: WPA and WPA2, 802.1X (EAP-TLS, TTLS, PEAP, LEAP, EAP-FAST), EAP-SIM,

EAP-AKA

• Encryption: 64-bit and 128-bit WEP, AES-CCMP, TKIP, WPA2, AES-CCMP

For information about

Refer to

Obtaining WLAN software and drivers

http://downloadcenter.intel.com

Full Specifications

http://intel.com/wireless

1.11 Hardware Management Subsystem

The hardware management features enable the board to be compatible with the Wired for

Management (WfM) specification. The board has several hardware management features,

including thermal and voltage monitoring.

For information about Refer to

Wired for Management (WfM) Specification www.intel.com/design/archives/wfm/

1.11.1 Hardware Monitoring

The hardware monitoring and fan control subsystem is based on an ITE Tech. IT8607E-DXS

embedded controller, which supports the following:

• Processor and system ambient temperature monitoring

• Chassis fan speed monitoring

• Voltage monitoring of +5 V, +3.3 V, Memory Vcc (V_SM), +Vccp,

• SMBus interface

1.11.2 Fan Monitoring

Fan monitoring can be implemented using third-party software.