Specification

Intel Compute Stick STCK1AW32SC and STCK1A32SC Technical Product Specification

3.6.4 Power Button Menu

The Power Button Menu is accessible via the following sequence:

1. System is in S5 (not G3)

2. User pushes the power button and holds it down for approximately 3 seconds

3. Release immediately

4. User releases the power button before the 4-second shutdown override

If this boot path is taken, the BIOS will use default settings, ignoring settings in VPD where

possible.

At the point where Setup Entry/Boot would be in the normal boot path, the BIOS will display the

following prompt and wait for a keystroke:

[ESC] Normal Boot

[F2] Intel BIOS Setup

[F4] BIOS Recovery

[F7] Update BIOS

[F10] Enter Boot Menu

3.7 BIOS Error Messages

Table 10 lists the error messages and provides a brief description of each.

Table 10. BIOS Error Messages

Error Message Explanation

CMOS Battery Low The battery may be losing power. Replace the battery soon.

CMOS Checksum Bad The CMOS checksum is incorrect. CMOS memory may have been

corrupted. Run Setup to reset values.

No Boot Device Available System did not find a device to boot.