User Manual

User Guide for NUC7i3DNHNC
3
• Upgrade memory (RAM)
• Change/install an M.2 SSD
• Change/install a 2.5-inch drive
• Use a VESA mount bracket
• Connect power
• Set up Microsoft® Windows® 10
• Keep device drivers current
• Recover the operating system
Open the Chassis
Unscrew the four corner screws on the bottom of the chassis and lift the cover.
Upgrade System Memory
The Intel NUC Kits NUC7i3DNHNC have two 260-pin DDR4 SO-DIMM sockets, pre-installed with
one 4GB DDR4 2133 MHz SO-DIMM.
To upgrade memory, be sure to select memory modules that meet these requirements:
 1.2V low voltage memory
 2133 MHz SO-DIMMs
 Non-ECC
Find compatible memory modules in the Intel Product Compatibility Tool:
 NUC7i3DNHNC
NOTE
If you plan to install only one memory module, install it in the lower memory
socket.