Intel® Desktop Board DG41TY Technical Product Specification November 2008 Order Number: E53697-001US The Intel® Desktop Board DG41TY may contain design defects or errors known as errata that may cause the product to deviate from published specifications. Current characterized errata are documented in the Intel Desktop Board DG41TY Specification Update.
Revision History Revision Revision History Date -001 First release of the Intel® Desktop Board DG41TY Technical Product November 2008 Specification This product specification applies to only the standard Intel® Desktop Board DG41TY with BIOS identifier TYG4110H.86A. Changes to this specification will be published in the Intel Desktop Board DG41TY Specification Update before being incorporated into a revision of this document.
Preface This Technical Product Specification (TPS) specifies the board layout, components, connectors, power and environmental requirements, and the BIOS for the Intel® Desktop Board DG41TY. It describes the standard product and available manufacturing options. Intended Audience The TPS is intended to provide detailed, technical information about the Intel Desktop Board DG41TY and its components to the vendors, system integrators, and other engineers and technicians who need this level of information.
Intel Desktop Board DG41TY Technical Product Specification Other Common Notation iv # Used after a signal name to identify an active-low signal (such as USBP0#) GB Gigabyte (1,073,741,824 bytes) GB/sec Gigabytes per second Gbit Gigabit (1, 073,741,824 bits) KB Kilobyte (1024 bytes) Kbit Kilobit (1024 bits) kbits/sec 1000 bits per second MB Megabyte (1,048,576 bytes) MB/sec Megabytes per second Mbit Megabit (1,048,576 bits) Mbit/sec Megabits per second xxh An address or data value e
Contents 1 Product Description .............................................................. 9 1.1 Overview.......................................................................................... 9 1.1.1 Feature Summary .................................................................. 9 1.1.2 Board Layout ....................................................................... 11 1.1.3 Block Diagram ..................................................................... 13 1.2 Legacy Considerations........
Intel Desktop Board DG41TY Technical Product Specification 2.5 2.6 2.7 2.8 2.4.1 Form Factor......................................................................... Electrical Considerations ................................................................... 2.5.1 Power Supply Considerations ................................................. 2.5.2 Fan Header Current Capability................................................ 2.5.3 Add-in Board Considerations ...............................................
Contents Figures Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure 1. Major Board Components............................................................... 2. Block Diagram.............................................................................. 3. Memory Channel Configuration and DIMM Configuration..................... 4. Back Panel Audio Connector Options................................................ 5. LAN Connector LED Locations ...........
Intel Desktop Board DG41TY Technical Product Specification Table Table Table Table Table Table Table Table Table Table Table Table Table Table Table Table Table viii 30. 31. 32. 33. 34. 35. 36. 37. 38. 39. 40. 41. 42. 43. 44. 45. 46. Fan Header Current Capability ....................................................... Thermal Considerations for Components.......................................... Intel® Desktop Board DG41TY Environmental Specifications ............... BIOS Setup Program Menu Bar .......
1 Product Description 1.1 Overview 1.1.1 Feature Summary Table 1 summarizes the major features of the Intel Desktop Board DG41TY. Table 1. Feature Summary Form Factor Micro-ATX (9.60 inches by 8.60 inches [243.84 millimeters by 218.
Intel Desktop Board DG41TY Technical Product Specification Table 1.
Product Description 1.1.2 Board Layout Figure 1 shows the location of the major components. Figure 1. Major Board Components Table 2 lists the components identified in Figure 1.
Intel Desktop Board DG41TY Technical Product Specification Table 2.
Product Description 1.1.3 Block Diagram Figure 2 is a block diagram of the major functional areas. Figure 2.
Intel Desktop Board DG41TY Technical Product Specification 1.2 Legacy Considerations This board differs from other Intel® Desktop Board products, with specific changes including (but not limited to) the following: • 1.3 No serial port on the back panel Online Support To find information about… Visit this World Wide Web site: Intel Desktop Board DG41TY http://www.intel.com/products/motherboard/DG41TY/index.htm Desktop Board Support http://support.intel.
Product Description For information about Refer to Power supply connectors Section 2.2.2.4, page 49 1.5 System Memory The board has two DIMM sockets and supports the following memory features: • • • 1.
Intel Desktop Board DG41TY Technical Product Specification 1.5.1 Memory Configurations The Intel 82G41 GMCH supports the following types of memory organization: • • • 16 Dual channel (Interleaved) mode. This mode offers the highest throughput for real world applications. Dual channel mode is enabled when the installed memory capacities of both DIMM channels are equal. Technology and device width can vary from one channel to the other but the installed memory capacity for each channel must be equal.
Product Description Figure 3 illustrates the memory channel and DIMM configuration. Figure 3. Memory Channel Configuration and DIMM Configuration # INTEGRATOR’S NOTE Regardless of the memory configuration used (dual channel, single channel, or flex mode), DIMM 0 of Channel A must always be populated.
Intel Desktop Board DG41TY Technical Product Specification Intel® G41 Express Chipset 1.6 The Intel G41 Express chipset consists of the following devices: • • Intel 82G41 Graphics and Memory Controller Hub (GMCH) with Direct Media Interface (DMI) interconnect Intel 82801GB I/O Controller Hub (ICH7) with DMI interconnect The GMCH component provides interfaces to the CPU, memory, PCI Express, and the DMI interconnect.
Product Description • Display ⎯ Supports digital and analog displays up to 2048 x 1536 at 75 Hz refresh (QXGA); also supports 1920 x 1080 resolution for full High Definition video playback quality ⎯ Dual independent display support 1.6.1.2 Dynamic Video Memory Technology (DVMT 5.0) DVMT enables enhanced graphics and memory performance through highly efficient memory utilization. DVMT ensures the most efficient use of available system memory for maximum 2-D/3-D graphics performance.
Intel Desktop Board DG41TY Technical Product Specification Table 4. DVI Port Status Conditions PCI Express x16 connector status DVI Digital (DIV-D) port status No add-in card installed Enabled Non-video PCI Express x1 add-in card installed Enabled PCI Express x4, x8, or 16 add-in card installed Disabled ADD2 or MEC card installed Disabled 1.6.1.
Product Description 1.6.2 USB The board supports up to eight USB 2.0 ports, supports UHCI and EHCI, and uses UHCI- and EHCI-compatible drivers. The ICH7 provides the USB controller for all ports.
Intel Desktop Board DG41TY Technical Product Specification 1.7 Parallel IDE Controller The Parallel ATA IDE controller has one bus-mastering Parallel ATA IDE interface. The Parallel ATA IDE interface supports the following modes: • • • • • Programmed I/O (PIO): processor controls data transfer. 8237-style DMA: DMA offloads the processor, supporting transfer rates of up to 16 MB/sec. Ultra DMA: DMA protocol on IDE bus supporting host and target throttling and transfer rates of up to 33 MB/sec.
Product Description 1.8 Real-Time Clock Subsystem A coin-cell battery (CR2032) powers the real-time clock and CMOS memory. When the computer is not plugged into a wall socket, the battery has an estimated life of three years. When the computer is plugged in, the standby current from the power supply extends the life of the battery. The clock is accurate to ± 13 minutes/year at 25 ºC with 3.3 VSB applied.
Intel Desktop Board DG41TY Technical Product Specification 1.9.2 PS/2 Keyboard and Mouse Interface The PS/2 keyboard and mouse connectors are located on the back panel. NOTE The keyboard is supported in the bottom PS/2 connector and the mouse is supported in the top PS/2 connector. Power to the computer should be turned off before a keyboard or mouse is connected or disconnected.
Product Description 1.10 Audio Subsystem The onboard audio subsystem consists of the following: • • • • Intel 82801GB (ICH7) Realtek ALC888VC audio codec Back panel audio connectors Component-side audio headers/connectors: ⎯ Intel® High Definition Audio front panel header ⎯ S/PDIF connector The audio subsystem supports the following features: • • A signal-to-noise (S/N) ratio of 95 dB Independent 5.
Intel Desktop Board DG41TY Technical Product Specification 1.10.1 Audio Subsystem Software Audio software and drivers are available from Intel’s World Wide Web site. For information about Refer to Obtaining audio software and drivers Section 1.2, page 14 1.10.2 Audio Connectors and Headers The board contains audio connectors on the back panel and audio headers on the component side of the board. The front panel audio header provides mic in and line out signals for the front panel.
Product Description 1.
Intel Desktop Board DG41TY Technical Product Specification 1.11.2 RJ-45 LAN Connector with Integrated LEDs Two LEDs are built into the RJ-45 LAN connector (shown in Figure 5 below). Item Description A Link LED (Green) B Data Rate LED (Green/Yellow) Figure 5. LAN Connector LED Locations Table 6 describes the LED states when the board is powered up and the LAN subsystem is operating. Table 6.
Product Description 1.12 Hardware Management Subsystem The hardware management features enable the board to be compatible with the Wired for Management (WfM) specification. The board has several hardware management features, including the following: • • • Fan monitoring and control Thermal and voltage monitoring Chassis intrusion detection 1.12.
Intel Desktop Board DG41TY Technical Product Specification 1.12.4 Thermal Monitoring Figure 6 shows the locations of the thermal sensors and fan headers. Item Description A Rear chassis fan B Thermal diode, located on processor die C Thermal diode, located on the GMCH die D Processor fan E Front chassis fan F Thermal diode, located on the ICH7 die Figure 6. Thermal Sensors and Fan Headers NOTE The minimum thermal reporting threshold for the GMCH is 66 °C.
Product Description 1.13 Power Management Power management is implemented at several levels, including: • • Software support through Advanced Configuration and Power Interface (ACPI) Hardware support: ⎯ Power connector ⎯ Fan headers ⎯ LAN wake capabilities ⎯ Instantly Available PC technology ⎯ Wake from USB ⎯ Wake from PS/2 devices ⎯ Power Management Event signal (PME#) wake-up support 1.13.
Intel Desktop Board DG41TY Technical Product Specification 1.13.1.1 System States and Power States Under ACPI, the operating system directs all system and device power state transitions. The operating system puts devices in and out of low-power states based on user preferences and knowledge of how devices are being used by applications. Devices that are not being used can be turned off.
Product Description 1.13.1.2 Wake-up Devices and Events Table 9 lists the devices or specific events that can wake the computer from specific states. Table 9. Wake-up Devices and Events These devices/events can wake up the computer… …from this state LAN S1, S3, S4, S5 (Note 1) PME# signal S1, S3, S4, S5 (Note 1) Power switch S1, S3, S4, S5 PS/2 devices S1, S3, S5 (Note 2) RTC alarm S3, S4, S5 Serial port S3 USB S3 WAKE# signal S1, S3, S4, S5 Notes: 1.
Intel Desktop Board DG41TY Technical Product Specification 1.13.2 Hardware Support CAUTION Ensure that the power supply provides adequate +5 V standby current if LAN wake capabilities and Instantly Available PC technology features are used. Failure to do so can damage the power supply. The total amount of standby current required depends on the wake devices supported and manufacturing options.
Product Description 1.13.2.2 Fan Headers The function/operation of the fan headers is as follows: • • • • The fans are on when the board is in the S0 state. The fans are off when the board is off or in the S3, S4, or S5 state. The processor fan header is wired to a fan tachometer input. The front and rear fan headers each have independent tachometer input to the hardware monitoring and fan control device.
Intel Desktop Board DG41TY Technical Product Specification 1.13.2.4 Instantly Available PC Technology CAUTION For Instantly Available PC technology, the +5 V standby line from the power supply must be capable of providing adequate +5 V standby current. Failure to provide adequate standby current when implementing Instantly Available PC technology can damage the power supply. Instantly Available PC technology enables the board to enter the ACPI S3 (Suspend-toRAM) sleep-state.
Product Description 1.13.2.9 +5 V Standby Power Indicator LED The +5 V standby power indicator LED shows that power is still present even when the computer appears to be off. Figure 7 shows the location of the standby power indicator LED. CAUTION If AC power has been switched off and the standby power indicator is still lit, disconnect the power cord before installing or removing any devices connected to the board. Failure to do so could damage the board and any attached devices. Figure 7.
Intel Desktop Board DG41TY Technical Product Specification 38
2 Technical Reference 2.1 Memory Map 2.1.1 Addressable Memory The board utilizes 8 GB of addressable system memory. Typically the address space that is allocated for PCI Conventional bus add-in cards, PCI Express configuration space, BIOS (SPI Flash), and chipset overhead resides above the top of DRAM (total system memory).
Intel Desktop Board DG41TY Technical Product Specification The amount of installed memory that can be used will vary based on add-in cards and BIOS settings. Figure 8 shows a schematic of the system memory map. All installed system memory can be used when there is no overlap of system addresses. Figure 8.
Technical Reference Table 10 lists the system memory map. Table 10. System Memory Map Address Range (decimal) Address Range (hex) Size Description 1024 K - 8388608 K 100000 - 1FFFFFFFF 8191 MB Extended memory 960 K - 1024 K F0000 - FFFFF 64 KB Runtime BIOS 896 K - 960 K E0000 - EFFFF 64 KB Reserved 800 K - 896 K C8000 - DFFFF 96 KB Potential available high DOS memory (open to the PCI bus). Dependent on video adapter used.
Intel Desktop Board DG41TY Technical Product Specification 2.2 Connectors and Headers CAUTION Only the following connectors and headers have overcurrent protection: Back panel and front panel USB and PS/2. The other internal connectors/headers are not overcurrent protected and should connect only to devices inside the computer’s chassis, such as fans and internal peripherals. Do not use these connectors/headers to power devices external to the computer’s chassis.
Technical Reference 2.2.1 Back Panel Connectors Figure 9 shows the locations of the back panel connectors. Item Description A PS/2 mouse port B PS/2 keyboard port C VGA port D Parallel port E DVI port F USB ports [2] G LAN H USB ports [2] I Line in J Mic in K Line out Figure 9.
Intel Desktop Board DG41TY Technical Product Specification 2.2.2 Component-side Connectors and Headers Figure 10 shows the locations of the component-side connectors and headers. Figure 10.
Technical Reference Table 11 lists the component-side connectors and headers identified in Figure 10. Table 11.
Intel Desktop Board DG41TY Technical Product Specification 2.2.2.1 Signal Tables for the Connectors and Headers Table 12. HD Audio Link Header Pin Signal Name Pin Signal Name 1 BCLK 2 Ground 3 RST# 4 DVDD IO 5 SYNC 6 Ground 7 SDO 8 3.3 V DVDD CORE 9 SDI0 10 +12 V 11 SDI1 12 Key (no pin) 13 Not connected 14 3.3 V DUAL 15 Not connected 16 Ground Pin Signal Name Table 13.
Technical Reference Table 16. Front and Rear Chassis Fan Headers Pin Signal Name 1 Control 2 +12 V 3 Tach Table 17. Processor Fan Header Pin Signal Name 1 Ground 2 +12 V 3 FAN_TACH 4 FAN_CONTROL Table 18.
Intel Desktop Board DG41TY Technical Product Specification 2.2.2.2 Add-in Card Connectors The board has the following add-in card connectors: • • • One PCI Express x16 connector: ⎯ Supports PCI Express 1.1 frequency of 1.25 GHz resulting in 2.5 Gb/s each direction (500 MB/s total). The maximum theoretical bandwidth on the interface is 4 GB/s in each direction simultaneously, for an aggregate of 8 GB/s when operating in x16 mode. PCI Express x1: one PCI Express x1 connector.
Technical Reference 2.2.2.4 Power Supply Connectors The board has the following power supply connectors: • • Main power – a 2 x 12 connector. This connector is compatible with 2 x 10 connectors previously used on Intel Desktop boards. The board supports the use of ATX12V power supplies with either 2 x 10 or 2 x 12 main power cables. When using a power supply with a 2 x 10 main power cable, attach that cable on the rightmost pins of the main power connector, leaving pins 11, 12, 23, and 24 unconnected.
Intel Desktop Board DG41TY Technical Product Specification 2.2.2.5 Front Panel Header This section describes the functions of the front panel header. Table 23 lists the signal names of the front panel header. Figure 11 is a connection diagram for the front panel header. Table 23.
Technical Reference 2.2.2.5.2 Reset Switch Header Pins 5 and 7 can be connected to a momentary single pole, single throw (SPST) type switch that is normally open. When the switch is closed, the board resets and runs the POST. 2.2.2.5.3 Power/Sleep LED Header Pins 2 and 4 can be connected to a one- or two-color LED. Table 24 shows the possible states for a one-color LED. Table 25 shows the possible states for a two-color LED. Table 24.
Intel Desktop Board DG41TY Technical Product Specification 2.2.2.7 Front Panel USB Headers Figure 12 is a connection diagram for the front panel USB headers. # INTEGRATOR’S NOTES • • The +5 V DC power on the front panel USB headers is fused. Use only a front panel USB connector that conforms to the USB 2.0 specification for high-speed USB devices. Figure 12.
Technical Reference 2.3 Jumper Block CAUTION Do not move the jumper with the power on. Always turn off the power and unplug the power cord from the computer before changing a jumper setting. Otherwise, the board could be damaged. Figure 13 shows the location of the jumper block. The jumper determines the BIOS Setup program’s mode. Table 27 lists the jumper settings for the three modes: normal, configure, and recovery.
Intel Desktop Board DG41TY Technical Product Specification 2.4 2.4.1 Mechanical Considerations Form Factor The board is designed to fit into an ATX-form-factor chassis. Figure 14 illustrates the mechanical form factor of the board. Dimensions are given in inches [millimeters]. The outer dimensions are 9.60 inches by 8.60 inches [243.84 millimeters by 218.44 millimeters]. Location of the I/O connectors and mounting holes are in compliance with the ATX specification. Figure 14.
Technical Reference 2.5 Electrical Considerations 2.5.1 Power Supply Considerations CAUTION The +5 V standby line from the power supply must be capable of providing adequate +5 V standby current. Failure to do so can damage the power supply. The total amount of standby current required depends on the wake devices supported and manufacturing options. Additional power required will depend on configurations chosen by the integrator.
Intel Desktop Board DG41TY Technical Product Specification 2.5.2 Fan Header Current Capability CAUTION The processor fan must be connected to the processor fan header, not to a chassis fan header. Connecting the processor fan to a chassis fan header may result in onboard component damage that will halt fan operation. Table 29 lists the current capability of the fan headers. Table 29. Fan Header Current Capability Fan Header Maximum Available Current Processor fan 2.0 A Front chassis fan 1.
Technical Reference CAUTION Ensure that proper airflow is maintained in the processor voltage regulator circuit. Failure to do so may result in damage to the voltage regulator circuit. The processor voltage regulator area (shown in Figure 15) can reach a temperature of up to 95 oC in an open chassis. Figure 15 shows the locations of the localized high temperature zones. Item Description A B C D Processor voltage regulator area Processor Intel 82G41 GMCH Intel 82801GB (ICH7) Figure 15.
Intel Desktop Board DG41TY Technical Product Specification Table 30 provides maximum case temperatures for the board components that are sensitive to thermal changes. The operating temperature, current load, or operating frequency could affect case temperatures. Maximum case temperatures are important when considering proper airflow to cool the board. Table 30. Thermal Considerations for Components 2.
Technical Reference 2.8 Environmental Table 31 lists the environmental specifications for the board. Table 31.
Intel Desktop Board DG41TY Technical Product Specification 60
3 Overview of BIOS Features 3.1 Introduction The board uses an Intel BIOS that is stored in the Serial Peripheral Interface Flash Memory (SPI Flash) and can be updated using a disk-based program. The SPI Flash contains the BIOS Setup program, POST, the PCI auto-configuration utility, and Plug and Play support. The BIOS displays a message during POST identifying the type of BIOS and a revision code. The initial production BIOSs are identified as TYG4110H.86A.
Intel Desktop Board DG41TY Technical Product Specification Table 32 lists the BIOS Setup program menu features. Table 32.
Overview of BIOS Features 3.3.2 PCI IDE Support The IDE interface supports hard drives up to ATA-66/100 and recognizes any ATAPI compliant devices, including CD-ROM drives, tape drives, and Ultra DMA drives. To use ATA-66/100 features the following items are required: • • • An ATA-66/100 peripheral device An ATA-66/100 compatible cable ATA-66/100 operating system device drivers NOTE Do not connect an ATA device as a slave on the same IDE cable as an ATAPI master device.
Intel Desktop Board DG41TY Technical Product Specification 1. When you apply power to the computer, legacy support is disabled. 2. POST begins. 3. Legacy USB support is enabled by the BIOS allowing you to use a USB keyboard to enter and configure the BIOS Setup program and the maintenance menu. 4. POST completes. 5. The operating system loads. While the operating system is loading, USB keyboards and mice are recognized and may be used to configure the operating system.
Overview of BIOS Features 3.6 BIOS Updates The BIOS can be updated using either of the following utilities, which are available on the Intel World Wide Web site: • • Intel® Express BIOS Update utility, which enables automated updating while in the Windows environment. Using this utility, the BIOS can be updated from a file on a hard disk, a USB drive (a flash drive or a USB hard drive), or a CD-ROM, or from the file location on the Web.
Intel Desktop Board DG41TY Technical Product Specification 3.6.2 Custom Splash Screen During POST, an Intel® splash screen is displayed by default. This splash screen can be augmented with a custom splash screen. The Intel® Integrator Toolkit or Intel® Integrator Assistant that are available from Intel can be used to create a custom splash screen. NOTE If you add a custom splash screen, it will share space with the Intel branded logo.
Overview of BIOS Features 3.8 Boot Options In the BIOS Setup program, the user can choose to boot from a diskette drive, hard drive, USB drive, USB flash drive, CD-ROM, or the network. The default setting is for the diskette drive to be the first boot device, the hard drive second, and the ATAPI CD-ROM third. The fourth device is disabled. 3.8.1 CD-ROM Boot Booting from CD-ROM is supported in compliance to the El Torito bootable CD-ROM format specification.
Intel Desktop Board DG41TY Technical Product Specification 3.9 Adjusting Boot Speed These factors affect system boot speed: • • 3.9.1 Selecting and configuring peripherals properly Optimized BIOS boot parameters Peripheral Selection and Configuration The following techniques help improve system boot speed: • • • • 3.9.2 Choose a hard drive with parameters such as “power-up to data ready” less than eight seconds, that minimize hard drive startup delays.
Overview of BIOS Features 3.10 BIOS Security Features The BIOS includes security features that restrict access to the BIOS Setup program and who can boot the computer. A supervisor password and a user password can be set for the BIOS Setup program and for booting the computer, with the following restrictions: • • • • • • • The supervisor password gives unrestricted access to view and change all the Setup options in the BIOS Setup program. This is the supervisor mode.
Intel Desktop Board DG41TY Technical Product Specification 70
4 Error Messages and Beep Codes 4.1 Speaker The board-mounted speaker provides audible error code (beep code) information during POST. 4.2 For information about Refer to The location of the onboard speaker Figure 1, page 11 BIOS Beep Codes Whenever a recoverable error occurs during POST, the BIOS causes the board’s speaker to beep an error message describing the problem (see Table 37). Table 37.
Intel Desktop Board DG41TY Technical Product Specification 4.4 Port 80h POST Codes During the POST, the BIOS generates diagnostic progress codes (POST codes) to I/O port 80h. If the POST fails, execution stops and the last POST code generated is left at port 80h. This code is useful for determining the point where an error occurred. Displaying the POST codes requires a PCI bus add-in card, often called a POST card.
Error Messages and Beep Codes Table 40.
Intel Desktop Board DG41TY Technical Product Specification Table 40.
Error Messages and Beep Codes Table 40.
Intel Desktop Board DG41TY Technical Product Specification Table 41.
5 Regulatory Compliance and Battery Disposal Information 5.1 Regulatory Compliance This section contains the following regulatory compliance information for Intel Desktop Board DG41TY: • • • • • 5.1.
Intel Desktop Board DG41TY Technical Product Specification 5.1.2 European Union Declaration of Conformity Statement We, Intel Corporation, declare under our sole responsibility that the product Intel® Desktop Board DG41TY is in conformity with all applicable essential requirements necessary for CE marking, following the provisions of the European Council Directive 2004/108/EC (EMC Directive) and 2006/95/EC (Low Voltage Directive).
Regulatory Compliance and Battery Disposal Information Español Este producto cumple con las normas del Directivo Europeo 2004/108/EC & 2006/95/EC. Slovensky Tento produkt je v súlade s ustanoveniami európskych direktív 2004/108/EC a 2006/95/EC. Slovenščina Izdelek je skladen z določbami evropskih direktiv 2004/108/EC in 2006/95/EC. Svenska Denna produkt har tillverkats i enlighet med EG-direktiv 2004/108/EC & 2006/95/EC. Türkçe Bu ürün, Avrupa Birliği’nin 2004/108/EC ve 2006/95/EC yönergelerine uyar. 5.1.
Intel Desktop Board DG41TY Technical Product Specification Español Como parte de su compromiso de responsabilidad medioambiental, Intel ha implantado el programa de reciclaje de productos Intel, que permite que los consumidores al detalle de los productos Intel devuelvan los productos usados en los lugares seleccionados para su correspondiente reciclado. Consulte la http://www.intel.
Regulatory Compliance and Battery Disposal Information Russian В качестве части своих обязательств к окружающей среде, в Intel создана программа утилизации продукции Intel (Product Recycling Program) для предоставления конечным пользователям марок продукции Intel возможности возврата используемой продукции в специализированные пункты для должной утилизации. Пожалуйста, обратитесь на веб-сайт http://www.intel.
Intel Desktop Board DG41TY Technical Product Specification Table 43. Lead-Free Board Markings Description Mark nd Lead-Free 2 Level Interconnect: This symbol is used to identify electrical and electronic assemblies and components in which the lead (Pb) concentration level in the desktop board substrate and the solder connections from the board to the components (second-level interconnect) is not greater than 0.1% by weight (1000 ppm).
Regulatory Compliance and Battery Disposal Information 5.1.4 EMC Regulations The Intel Desktop Board DG41TY complies with the EMC regulations stated in Table 44 when correctly installed in a compatible host system. Table 44. EMC Regulations Regulation Title FCC 47 CFR Part 15, Subpart B Title 47 of the Code of Federal Regulations, Part 15, Subpart B, Radio Frequency Devices. (USA) ICES-003 Issue 4 (Class B) Interference-Causing Equipment Standard, Digital Apparatus.
Intel Desktop Board DG41TY Technical Product Specification Korean Class B statement translation: this is household equipment that is certified to comply with EMC requirements. You may use this equipment in residential environments and other non-residential environments. 5.1.5 Product Certification Markings (Board Level) Intel Desktop Board DG41TY has the product certification markings shown in Table 45: Table 45.
Regulatory Compliance and Battery Disposal Information 5.2 Battery Disposal Information CAUTION Risk of explosion if the battery is replaced with an incorrect type. Batteries should be recycled where possible. Disposal of used batteries must be in accordance with local environmental regulations. PRÉCAUTION Risque d'explosion si la pile usagée est remplacée par une pile de type incorrect. Les piles usagées doivent être recyclées dans la mesure du possible.
Intel Desktop Board DG41TY Technical Product Specification PRECAUCIÓN Existe peligro de explosión si la pila no se cambia de forma adecuada. Utilice solamente pilas iguales o del mismo tipo que las recomendadas por el fabricante del equipo. Para deshacerse de las pilas usadas, siga igualmente las instrucciones del fabricante. WAARSCHUWING Er bestaat ontploffingsgevaar als de batterij wordt vervangen door een onjuist type batterij. Batterijen moeten zoveel mogelijk worden gerecycled.
Regulatory Compliance and Battery Disposal Information AWAS Risiko letupan wujud jika bateri digantikan dengan jenis yang tidak betul. Bateri sepatutnya dikitar semula jika boleh. Pelupusan bateri terpakai mestilah mematuhi peraturan alam sekitar tempatan. OSTRZEŻENIE Istnieje niebezpieczeństwo wybuchu w przypadku zastosowania niewłaściwego typu baterii. Zużyte baterie należy w miarę możliwości utylizować zgodnie z odpowiednimi przepisami ochrony środowiska.
Intel Desktop Board DG41TY Technical Product Specification 88
