Datasheet

Technical Reference
51
2.4 Mechanical Considerations
2.4.1 Form Factor
The board is designed to fit into a mini-ITX or microATX form-factor chassis.
Figure 2-9 illustrates the mechanical form factor for the board. Dimensions are given
in
inches [millimeters]. The outer dimensions are 6.7 inches by 6.7 inches
[170 millimeters by 170 millimeters]. Location of the I/O connectors and mounting
holes are in compliance with the microATX specification.
Figure 2-9. Board Dimensions

NOTE
The board is designed to have a total height of less than 20 mm from the underside of
the board to the top of its tallest components, including all back panel I/O ports,
internal connectors, installed system memory, and thermal solutions.