Datasheet

Intel Desktop Board D945GSEJT Technical Product Specification
16
1.5 Mobile Intel
®
945GSE Chipset
The Mobile Intel 945GSE chipset consists of the following devices:
• Intel 82945GSE Graphics and Memory Controller Hub (GMCH) with Direct Media
Interface (DMI) interconnect
• Intel 82801GBM I/O Controller Hub (ICH7-M) with DMI interconnect
The GMCH component provides interfaces to the CPU, memory, and the DMI
interconnect. The component also provides integrated graphics capabilities supporting
3D, 2D, and display capabilities. The ICH7-M is a centralized controller for the board’s
I/O paths.

NOTE
The board is designed to be passively cooled in a properly ventilated chassis. Chassis
venting locations are recommended above the GMCH heatsink area for maximum heat
dissipation effectiveness.
For information about Refer to
The Intel 945GSE chipset http://www.intel.com/design/chipsets/embedded/945gse/
Resources used by the chipset Chapter 2
1.5.1 Intel 945GSE Graphics Subsystem
1.5.1.1 Intel
®
GMA950 Graphics Controller
The Intel GMA950 graphics controller features the following:
• 166 MHz core frequency
• High performance 3-D setup and render engine
• High quality texture engine
⎯ DX9* Compliant Hardware Pixel Shader 2.0
⎯ Alpha and luminance maps
⎯ Texture color-keying/chroma-keying
⎯ Cubic environment reflection mapping
⎯ Enhanced texture blending functions
• 3D Graphics Rendering enhancements
⎯ 1.3 Dual Texture GigaPixel/Sec Fill Rate
⎯ 16 and 32 bit color
⎯ Maximum 3D supported resolution of 1600 x 1200 x 32 at 85 Hz
⎯ Vertex cache
⎯ Anti-aliased lines
⎯ OpenGL* version 1.4 support with vertex buffer and EXT_Shadow extensions