Datasheet

Product Description
37
OM16108
Connect to
S/PDIF output
on Back Panel
1/8-inch Stereo
Phone Plug
RCA Jack
Left Channel
(White, if colored)
Connect to 5.1
speaker system or
an S/PDIF decoder
Figure 12. Adapter for S/PDIF Back Panel Connector
Figure 13 is a block diagram of the Flex 6 audio subsystem.
82801EB (ICH5) or
82801ER (ICH5-R)
I/O Controller Hub
AC ’97 Link
AD1985
Audio Codec
Mic In
Front Left and Right Out
CD-ROM
Line In
Center and LFE (Subwoofer) Out
Rear Left and Right Out
S/PDIF
Auxiliary Line In
OM16105
Figure 13. Flex 6 Audio Subsystem Block Diagram
For information about Refer to
The front panel audio connector Section 2.8.3, page 70
The back panel audio connectors Section 2.8.1, page 60
1.10.3 Audio Connectors
1.10.3.1 Auxiliary Line In Connector
A 1 x 4-pin ATAPI-style connector connects the left and right channel signals of an internal audio
device to the audio subsystem.
For information about Refer to
The location of the optional auxiliary line in connector Figure 20, page 63
The signal names of the optional auxiliary line in connector Table 26, page 64