Datasheet

Intel Desktop Board D845GEBV2/D845GERG2 Technical Product Specification
64
Table 25. Front Panel Audio Connector
Pin Signal Name Pin Signal Name
1 MIC_IN 2 Ground
3 MIC_BIAS 4 +5 V
5 RIGHT_OUT 6 RIGHT_IN
7 Ground 8 Key
9 LEFT_OUT 10 LEFT_IN
#
INTEGRATOR’S NOTE
The front panel audio connector is alternately used as a jumper block for routing audio signals.
Refer to Section 2.9.1 on page 72 for more information.
Table 26. Auxiliary Line In Connector
Pin Signal Name
1 Left auxiliary line in
2 Ground
3 Ground
4 Right auxiliary line in
Table 27. Rear Chassis Fan Connector
Pin Signal Name
1 (Note)
2 +12 V
3 REAR_TACH_OUT
Note: Pin 1 is Control if the Desktop Board uses the hardware monitoring and fan control ASIC.
Pin 1 is Ground if the Desktop Board uses the hardware monitoring ASIC.
Table 28. ATAPI CD-ROM Connector
Pin Signal Name
1 Left audio input from CD-ROM
2 CD audio differential ground
3 CD audio differential ground
4 Right audio input from CD-ROM