Datasheet
Table Of Contents
- Intel® Desktop Board D2550DC2 Technical Product Specification
- Revision History
- Preface
- Contents
- 1 Product Description
- 2 Technical Reference
- 3 Overview of BIOS Features
- 4 Board Status and Error Messages
- 5 Regulatory Compliance and Battery Disposal Information

Intel Desktop Board D2550DC2 Technical Product Specification
20
1.5 Intel
®
NM10 Express Chipset
The Intel NM10 Express Chipset provides interfaces to the processor and the USB,
SATA, LPC, LAN, PCI, and PCI Express interfaces. The Intel NM10 Express Chipset is a
centralized controller for the board’s I/O paths.
NOTE
The board is designed to be passively cooled in a properly ventilated chassis. Chassis
venting locations are recommended above the processor heatsink area for maximum
heat dissipation effectiveness.
For information about Refer to
The Intel NM10 Express chipset http://www.intel.com/products/desktop/chipsets/index.htm
Resources used by the chipset Chapter 2
1.5.1.1 Video Memory Allocation
Video memory is allocated from the total available system memory for the efficient
balancing of 2-D/3-D graphics performance and overall system performance. Dynamic
allocation of system memory to video memory is as follows:
• 256 MB total RAM results in 32 MB video RAM
• 512 MB total RAM results in 64 MB video RAM
• 1 GB total RAM results in 128 MB video RAM
• 2 GB total RAM results in 224 MB video RAM
1.5.1.2 Digital Visual Interface (DVI-D)
The DVI-D port supports only digital DVI displays. The maximum supported resolution
is 1920 x 1200 at 60 Hz refresh (WUXGA). The DVI-D port is compliant with the
DVI 1.0 specification.