Datasheet

Product Description
23
1.6 S-Video Output
The D201GLY board supports S-Video output via 7 pin S-Video connector using
SiS307DV supporting both 4 pin S-Video and Composite signal.
For information about Refer to
The Silicon Integrated Systems SiS307DV http://www.sis.com/
1.7 Legacy I/O Controller
The Winbond W83672DHG-B Legacy I/O controller provides the following features:
• One serial port
• One parallel port with Extended Capabilities Port (ECP) and Enhanced Parallel Port
(EPP) support
• Serial IRQ interface compatible with serialized IRQ support for PCI Conventional
bus systems
• PS/2-style mouse and keyboard interfaces
• Intelligent power management, including a programmable wake-up event interface
• PCI Conventional bus power management support
The BIOS Setup program provides configuration options for the I/O controller.
1.7.1 Serial Port
The serial port A connector is located on the back panel. The serial port supports data
transfers at speeds up to 115.2 kbits/sec with BIOS support.
For information about Refer to
The location of the serial port A connector Figure 6, page 37