Intel® Desktop Board D201GLY Technical Product Specification May 2007 Order Number: D88126-001US The Intel® Desktop Board D201GLY may contain design defects or errors known as errata that may cause the product to deviate from published specifications. Current characterized errata are documented in the Intel Desktop Board D201GLY Specification Update.
Revision History Revision Revision History Date -001 First release of the Intel® Desktop Board D201GLY Technical Product Specification May 2007 This product specification applies to only standard Intel Desktop Board D201GLY with BIOS identifier LY66210M.86A. Changes to this specification will be published in the Intel Desktop Board D201GLY Specification Update before being incorporated into a revision of this document. INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL® PRODUCTS.
Preface This Technical Product Specification (TPS) specifies the board layout, components, connectors, power and environmental requirements, and the BIOS for the Intel® Desktop Board D201GLY. It describes the standard product and available manufacturing options. Intended Audience The TPS is intended to provide detailed, technical information about the Desktop Board D201GLY and its components to the vendors, system integrators, and other engineers and technicians who need this level of information.
Intel Desktop Board D201GLY Technical Product Specification Other Common Notation iv # Used after a signal name to identify an active-low signal (such as USBP0#) (NxnX) When used in the description of a component, N indicates component type, xn are the relative coordinates of its location on the board, and X is the instance of the particular part at that general location. For example, J5J1 is a connector, located at 5J. It is the first connector in the 5J area.
Contents 1 Product Description 1.1 Overview........................................................................................ 10 1.1.1 Feature Summary ................................................................ 10 1.1.2 Manufacturing Options .......................................................... 11 1.1.3 Board Layout ....................................................................... 12 1.1.4 Block Diagram ..................................................................... 14 1.
Intel Desktop Board D201GLY Technical Product Specification 2.5 Electrical Considerations ................................................................... 2.5.1 DC Loading.......................................................................... 2.5.2 Add-in Board Considerations .................................................. 2.5.3 Fan Header Current Capability................................................ 2.5.4 Power Supply Considerations ................................................. 2.
Contents Figures 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. Board Components .......................................................................... Block Diagram ................................................................................ Back Panel Audio Connectors ............................................................ LAN Connector LED Locations ............................................................ Location of the Standby Power Indicator LED .......................................
Intel Desktop Board D201GLY Technical Product Specification 32. 33. 34. 35. 36. 37. viii Supervisor and User Password Functions............................................. Front-panel Power LED Blink Codes .................................................... BIOS Error Messages ....................................................................... Port 80h POST Code Ranges.............................................................. Port 80h POST Codes .................................................
1 Product Description What This Chapter Contains 1.1 Overview........................................................................................ 10 1.2 Online Support................................................................................ 15 1.3 Processor ....................................................................................... 15 1.4 System Memory .............................................................................. 16 1.5 Silicon Integrated Systems* Chipset ..........
Intel Desktop Board D201GLY Technical Product Specification 1.1 Overview 1.1.1 Feature Summary Table 1 summarizes the major features of the board. Table 1. Feature Summary 10 Form Factor Mini-ITX, compatible with microATX (6.75 inches by 6.75 inches [171.45 millimeters by 171.
Product Description 1.1.2 Manufacturing Options Table 2 describes the manufacturing options. Not every manufacturing option is available in all marketing channels. Please contact your Intel representative to determine which manufacturing options are available to you. Table 2. Manufacturing Options S-Video Output Support for S-Video output. One S-Video output port located on the back panel. For information about Refer to Available configurations for the Desktop Board D201GLY Section 1.
Intel Desktop Board D201GLY Technical Product Specification 1.1.3 Board Layout Figure 1 shows the location of the major components. Figure 1. Board Components Table 3 lists the components identified in Figure 1.
Product Description Table 3.
Intel Desktop Board D201GLY Technical Product Specification 1.1.4 Block Diagram Figure 2 is a block diagram of the major functional areas of the board. Figure 2.
Product Description 1.2 Online Support To find information about… ® 1.3 Visit this World Wide Web site: Intel Desktop Board D201GLY under “Desktop Board Products” or “Desktop Board Support” http://www.intel.com/design/motherbd Available configurations for the Desktop Board D201GLY http://developer.intel.com/design/motherbd/ly/ly_available.htm Processor data sheets http://www.intel.com/products/index.htm Audio software and utilities http://www.intel.
Intel Desktop Board D201GLY Technical Product Specification 1.4 System Memory The board has one 240-pin DIMM socket and supports the following memory features: • • 1.8 V (only) DDR2 SDRAM DIMMs with gold-plated contacts Unbuffered, single-sided or double-sided DIMMs with the following restriction: Double-sided DIMMs with x16 organization are not supported.
Product Description 1.5 Silicon Integrated Systems* Chipset The Silicon Integrated Systems chipset consists of the following devices: • • SiS662 Northbridge SiS964L Southbridge The SiS662 Northbridge is a centralized controller for the system bus and the memory bus. The SiS662 Northbridge also provides integrated graphics capabilities supporting 3D, 2D, and display capabilities. The SiS964L Southbridge is a centralized controller for the board’s I/O paths.
Intel Desktop Board D201GLY Technical Product Specification 1.5.3 IDE Support The board provides one parallel ATA IDE connector that supports two devices. 1.5.3.1 Parallel ATA IDE Interface The D201GLY board has one bus-mastering Parallel ATA IDE interface. The Parallel ATA IDE interface supports the following modes: • • • • • Programmed I/O (PIO): processor controls data transfer. 8237-style DMA: DMA offloads the processor, supporting transfer rates of up to 16 MB/sec.
Product Description 1.5.4 Real-Time Clock, CMOS SRAM, and Battery A coin-cell battery (CR2032) powers the real-time clock and CMOS memory. When the computer is not plugged into a wall socket, the battery has an estimated life of three years. When the computer is plugged in, the standby current from the power supply extends the life of the battery. The clock is accurate to ± 13 minutes/year at 25 ºC with 3.3 VSB applied.
Intel Desktop Board D201GLY Technical Product Specification VORSICHT Bei falschem Einsetzen einer neuen Batterie besteht Explosionsgefahr. Die Batterie darf nur durch denselben oder einen entsprechenden, vom Hersteller empfohlenen Batterietyp ersetzt werden. Entsorgen Sie verbrauchte Batterien den Anweisungen des Herstellers entsprechend. AVVERTIMENTO Esiste il pericolo di un esplosione se la pila non viene sostituita in modo corretto.
Product Description VIGYAZAT Ha a telepet nem a megfelelő típusú telepre cseréli, az felrobbanhat. A telepeket lehetőség szerint újra kell hasznosítani. A használt telepeket a helyi környezetvédelmi előírásoknak megfelelően kell kiselejtezni. AWAS Risiko letupan wujud jika bateri digantikan dengan jenis yang tidak betul. Bateri sepatutnya dikitar semula jika boleh. Pelupusan bateri terpakai mestilah mematuhi peraturan alam sekitar tempatan.
Intel Desktop Board D201GLY Technical Product Specification UYARI Yanlış türde pil takıldığında patlama riski vardır. Piller mümkün olduğunda geri dönüştürülmelidir. Kullanılmış piller, yerel çevre yasalarına uygun olarak atılmalıdır. OСТОРОГА Використовуйте батареї правильного типу, інакше існуватиме ризик вибуху. Якщо можливо, використані батареї слід утилізувати. Утилізація використаних батарей має бути виконана згідно місцевих норм, що регулюють охорону довкілля.
Product Description 1.6 S-Video Output The D201GLY board supports S-Video output via 7 pin S-Video connector using SiS307DV supporting both 4 pin S-Video and Composite signal. For information about Refer to The Silicon Integrated Systems SiS307DV http://www.sis.com/ 1.
Intel Desktop Board D201GLY Technical Product Specification 1.7.2 Parallel Port The 25-pin D-Sub parallel port connector is located on the back panel. Use the BIOS Setup program to set the parallel port mode. For information about Refer to The location of the parallel port connector Figure 6, page 37 1.7.3 Keyboard and Mouse Interface PS/2 keyboard and mouse connectors are located on the back panel.
Product Description 1.8.2 Audio Connectors The board contains audio connectors on the back panel and an audio header on the component side of the board. The front panel audio header is a 2 x 5-pin header that provides mic in and line out signals for front panel audio connectors. The audio subsystem connectors are shown in Figure 3. Item Description A B C Line in Line out Mic in Figure 3.
Intel Desktop Board D201GLY Technical Product Specification 1.9 LAN Subsystem The LAN subsystem consists of the following: • • • • Broadcom AC131KLMG LAN adapter device for 10/100 Mbits/sec Ethernet LAN connectivity RJ-45 LAN connector with integrated status LEDs Programmable transit threshold Configurable EEPROM that contains the MAC address Two LEDs are built into the RJ-45 LAN connector (shown in Figure 4). Figure 4.
Product Description 1.10 Hardware Management Subsystem The hardware management features enable the board to be compatible with the Wired for Management (WfM) specification. The Winbond W83627DHG-B I/O controller is used to implement hardware monitoring and fan control.
Intel Desktop Board D201GLY Technical Product Specification 1.11.1 ACPI ACPI gives the operating system direct control over the power management and Plug and Play functions of a computer. The use of ACPI with this board requires an operating system that provides full ACPI support.
Product Description 1.11.1.1 System States and Power States Under ACPI, the operating system directs all system and device power state transitions. The operating system puts devices in and out of low-power states based on user preferences and knowledge of how devices are being used by applications. Devices that are not being used can be turned off. The operating system uses information from applications and user settings to put the system as a whole into a low-power state.
Intel Desktop Board D201GLY Technical Product Specification 1.11.1.2 Wake-up Devices and Events Table 8 lists the devices or specific events that can wake the computer from specific states. Table 8.
Product Description Resume on Ring enables telephony devices to access the computer when it is in a power-managed state. The method used depends on the type of telephony device (external or internal). NOTE The use of Resume on Ring and Wake from USB technologies from an ACPI state requires an operating system that provides full ACPI support. 1.11.2.1 Power Connector ATX12V-compliant power supplies can turn off the system power through system control.
Intel Desktop Board D201GLY Technical Product Specification 1.11.2.4 Resume on Ring The operation of Resume on Ring can be summarized as follows: • • • Resumes operation from ACPI S1 states Detects incoming call similarly for external and internal modems Requires modem interrupt be unmasked for correct operation 1.11.2.5 Wake from USB USB bus activity wakes the computer from ACPI S1 states. NOTE Wake from USB requires the use of a USB peripheral that supports Wake from USB. 1.11.2.
Product Description 1.11.2.8 +5 V Standby Power Indicator LED The +5 V standby power indicator LED shows that power is still present even when the computer appears to be off. Figure 5 shows the location of the standby power indicator LED. CAUTION If AC power has been switched off and the standby power indicator is still lit, disconnect the power cord before installing or removing any devices connected to the board. Failure to do so could damage the board and any attached devices. Figure 5.
Intel Desktop Board D201GLY Technical Product Specification 34
2 Technical Reference What This Chapter Contains 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 2.1 Memory Map................................................................................... Connectors and Headers................................................................... Jumper Blocks................................................................................. Mechanical Considerations ................................................................ Electrical Considerations .......................
Intel Desktop Board D201GLY Technical Product Specification 2.2 Connectors and Headers CAUTION Only the following connectors/headers have overcurrent protection: back panel USB, front panel USB, and PS/2. The other internal connectors/headers are not overcurrent protected and should connect only to devices inside the computer’s chassis, such as fans and internal peripherals. Do not use these connectors/headers to power devices external to the computer’s chassis.
Technical Reference 2.2.1 Back Panel Connectors Figure 6 shows the location of the back panel connectors. The back panel connectors are color-coded. The figure legend (Table 10) lists the colors used (when applicable). Figure 6. Back Panel Connectors Table 10.
Intel Desktop Board D201GLY Technical Product Specification 2.2.2 Component-side Connectors and Headers Figure 7 shows the locations of the component-side connectors and headers. Figure 7. Component-side Connectors and Headers Table 11 lists the component-side connectors and headers identified in Figure 7.
Technical Reference Table 11. Component-side Connectors and Headers Shown in Figure 7 Item/callout from Figure 7 Description A PCI Conventional bus add-in card connector B Front panel USB header C Front panel USB header D Front panel audio header E Chassis fan header F +12V power connector (ATX12V) G Main power connector H Processor fan header I Parallel ATA IDE connector J Front panel header Table 12.
Intel Desktop Board D201GLY Technical Product Specification 2.2.2.1 Power Supply Connectors The board has the following power supply connectors: • • Main power – a 2 x 10 connector. The board supports the use of ATX12V power supplies with 2 x 10 or 2 x 12 main power cables. ATX12V power – a 2 x 2 connector. This connector provides power directly to the processor voltage regulator and must always be used. Failure to do so will prevent the board from booting. Table 14.
Technical Reference 2.2.2.3 Front Panel Header This section describes the functions of the front panel header. Table 16 lists the signal names of the front panel header. Figure 8 is a connection diagram for the front panel header. Table 16.
Intel Desktop Board D201GLY Technical Product Specification 2.2.2.3.1 Hard Drive Activity LED Header [Orange] Pins 1 and 3 [Orange] can be connected to an LED to provide a visual indicator that data is being read from or written to a hard drive. Proper LED function requires an IDE hard drive connected to an onboard IDE connector. 2.2.2.3.2 Reset Switch Header [Blue] Pins 5 and 7 [Blue] can be connected to a momentary single pole, single throw (SPST) type switch that is normally open.
Technical Reference 2.2.3 Front Panel USB Headers Figure 9 is a connection diagram for the front panel USB headers. # INTEGRATOR’S NOTES • • • • The +5 V DC power on the USB connector is fused. Pins 1, 3, 5, and 7 comprise one USB port. Pins 2, 4, 6, and 8 comprise one USB port. Use only a front panel USB connector that conforms to the USB 2.0 specification for high-speed USB devices. Figure 9.
Intel Desktop Board D201GLY Technical Product Specification 2.3 Jumper Blocks CAUTION Do not move any jumpers with the power on. Always turn off the power and unplug the power cord from the computer before changing a jumper setting. Otherwise, the Desktop Board could be damaged. Figure 10 shows the location of the jumper blocks. Item Description A Front panel audio header/jumper block BIOS Setup configuration jumper block B Figure 10. Location of the Jumper Blocks 2.3.
Technical Reference CAUTION Do not place jumpers on this block in any configuration other than the one described in Table 19. Other jumper configurations are not supported and could damage the Desktop Board. Table 19. Front Panel Audio Header/Jumper Block Jumper Setting Configuration 5 and 6 9 and 10 No jumpers installed # Audio line out and mic in signals are routed to the back panel audio connectors. The back panel audio connectors are shown in Figure 6 on page 37.
Intel Desktop Board D201GLY Technical Product Specification 2.4 2.4.1 Mechanical Considerations Form Factor The board is designed to fit into a microATX-form-factor chassis. Figure 11 illustrates the mechanical form factor of the board. Dimensions are given in inches [millimeters]. The outer dimensions are 6.75 inches by 6.75 inches [171.45 millimeters by 171.45 millimeters]. Location of the I/O connectors and mounting holes are in compliance with the micro-ATX specification. Figure 11.
Technical Reference 2.5 Electrical Considerations 2.5.1 DC Loading Table 21 lists the DC loading characteristics of the board. This data is based on a DC analysis of all active components within the board that impact its power delivery subsystems. The analysis does not include PCI add-in cards. Minimum values assume a light load placed on the board that is similar to an environment with no applications running and no USB current draw.
Intel Desktop Board D201GLY Technical Product Specification 2.5.3 Fan Header Current Capability CAUTION The processor fan must be connected to the processor fan header, not to a chassis fan header. Connecting the processor fan to a chassis fan header may result in onboard component damage that will halt fan operation. Table 22 lists the current capability of the fan headers. Table 22. Fan Header Current Capability Fan Header Maximum Available Current Processor fan 2A Rear chassis fan 1.5 A 2.5.
Technical Reference 2.6 Thermal Considerations CAUTION Failure to ensure appropriate airflow may result in reduced performance of both the processor and/or voltage regulator or, in some instances, damage to the board. For a list of chassis that have been tested with Intel desktop boards please refer to the following website: http://developer.intel.com/design/motherbd/cooling.htm All responsibility for determining the adequacy of any thermal or system design remains solely with the reader.
Intel Desktop Board D201GLY Technical Product Specification Figure 12 shows the locations of the localized high temperature zones. Item Description A B C D Processor voltage regulator area Processor SiS662 Northbridge SiS964L Southbridge Figure 12. Localized High Temperature Zones The operating temperature, current load, or operating frequency could affect case temperatures. Maximum case temperatures are important when considering proper airflow to cool the board.
Technical Reference 2.7 Reliability The Mean Time Between Failures (MTBF) prediction is calculated using component and subassembly random failure rates. The calculation is based on the Bellcore Reliability Prediction Procedure, TR-NWT-000332, Issue 4, September 1991. The MTBF prediction is used to estimate repair rates and spare parts requirements. The MTBF data is calculated from predicted data at 55 ºC. Table 23 shows the MTBF value for each of the D201GLY board’s manufacturing options: Table 23. 2.
Intel Desktop Board D201GLY Technical Product Specification 2.9 Regulatory Compliance This section contains the following regulatory compliance information for Desktop Board D201GLY: • • • • • 2.9.
Technical Reference 2.9.2 European Union Declaration of Conformity Statement We, Intel Corporation, declare under our sole responsibility that the product Intel® Desktop Board D201GLY is in conformity with all applicable essential requirements necessary for CE marking, following the provisions of the European Council Directive 2004/108/EC(EMC Directive) and 2006/95/EC (Low Voltage Directive).
Intel Desktop Board D201GLY Technical Product Specification Malti Dan il-prodott hu konformi mal-provvedimenti tad-Direttivi Ewropej 2004/108/EC u 2006/95/EC. Norsk Dette produktet er i henhold til bestemmelsene i det europeiske direktivet 2004/108/EC & 2006/95/EC. Polski Niniejszy produkt jest zgodny z postanowieniami Dyrektyw Unii Europejskiej 2004/108/EC i 73/23/EWG. Portuguese Este produto cumpre com as normas da Diretiva Européia 2004/108/EC & 2006/95/EC.
Technical Reference 2.9.3 Product Ecology Statements The following information is provided to address worldwide product ecology concerns and regulations. 2.9.3.1 Disposal Considerations This product contains the following materials that may be regulated upon disposal: lead solder on the printed wiring board assembly. 2.9.3.
Intel Desktop Board D201GLY Technical Product Specification Français Dans le cadre de son engagement pour la protection de l'environnement, Intel a mis en œuvre le programme Intel Product Recycling Program (Programme de recyclage des produits Intel) pour permettre aux consommateurs de produits Intel de recycler les produits usés en les retournant à des adresses spécifiées. Visitez la page Web http://www.intel.
Technical Reference Türkçe Intel, çevre sorumluluğuna bağımlılığının bir parçası olarak, perakende tüketicilerin Intel markalı kullanılmış ürünlerini belirlenmiş merkezlere iade edip uygun şekilde geri dönüştürmesini amaçlayan Intel Ürünleri Geri Dönüşüm Programı’nı uygulamaya koymuştur. Bu programın ürün kapsamı, ürün iade merkezleri, nakliye talimatları, kayıtlar ve şartlar v.s dahil bütün ayrıntılarını ögrenmek için lütfen http://www.intel.com/intel/other/ehs/product_ecology Web sayfasına gidin. 2.9.3.
Intel Desktop Board D201GLY Technical Product Specification Table 26 shows the various forms of the “Lead-Free 2nd Level Interconnect” mark as it appears on the board and accompanying collateral. Table 26.
Technical Reference 2.9.4 EMC Regulations Desktop Board D201GLY complies with the EMC regulations stated in Table 27 when correctly installed in a compatible host system. Table 27. EMC Regulations Regulation Title FCC 47 CFR Part 15, Subpart B Title 47 of the Code of Federal Regulations, Part 15, Subpart B, Radio Frequency Devices. (USA) ICES-003 Issue 4 (Class B) Interference-Causing Equipment Standard, Digital Apparatus.
Intel Desktop Board D201GLY Technical Product Specification Japanese Kanji statement translation: this is a Class B product based on the standard of the Voluntary Control Council for Interference from Information Technology Equipment (VCCI). If this is used near a radio or television receiver in a domestic environment, it may cause radio interference. Install and use the equipment according to the instruction manual.
Technical Reference 2.9.5 Product Certification Markings (Board Level) Desktop Board D201GLY has the product certification markings shown in Table 28: Table 28. Product Certification Markings Description Mark UL joint US/Canada Recognized Component mark. Includes adjacent UL file number for Intel desktop boards: E210882. FCC Declaration of Conformity logo mark for Class B equipment. Includes Intel name and D201GLY model designation. CE mark.
Intel Desktop Board D201GLY Technical Product Specification 62
3 Overview of BIOS Features What This Chapter Contains 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 3.1 Introduction ................................................................................... BIOS Flash Memory Organization ....................................................... Resource Configuration .................................................................... System Management BIOS (SMBIOS)................................................. Legacy USB Support .....................................
Intel Desktop Board D201GLY Technical Product Specification Table 29 lists the BIOS Setup program menu features. Table 29.
Overview of BIOS Features 3.3.2 PCI IDE Support If you select Auto in the BIOS Setup program, the BIOS automatically sets up the PCI IDE connector with independent I/O channel support. The IDE interface supports hard drives up to ATA-66/100/133 and recognizes any ATAPI compliant devices, including CD-ROM drives, tape drives, and Ultra DMA drives. The interface also supports second-generation SATA drives.
Intel Desktop Board D201GLY Technical Product Specification 3.5 Legacy USB Support Legacy USB support enables USB devices to be used even when the operating system’s USB drivers are not yet available. Legacy USB support is used to access the BIOS Setup program, and to install an operating system that supports USB. Legacy USB support operates as follows: 1. When you apply power to the computer, legacy support is disabled. 2. POST begins. 3.
Overview of BIOS Features 3.6.1 Language Support The BIOS Setup program and help messages are supported in US English. Additional languages are available in the Intel® Integrator Toolkit utility. Check the Intel website for details. 3.6.2 Custom Splash Screen During POST, an Intel® splash screen is displayed by default. This splash screen can be augmented with a custom splash screen. The Intel Integrator Toolkit that is available from Intel can be used to create a custom splash screen.
Intel Desktop Board D201GLY Technical Product Specification 3.7.4 Changing the Default Boot Device During POST Pressing the key during POST causes a boot device menu to be displayed. This menu displays the list of available boot devices (as set in the BIOS setup program’s Boot Device Priority Submenu). Table 31 lists the boot device menu options. Table 31.
Overview of BIOS Features 3.8.2 BIOS Boot Optimizations Use of the following BIOS Setup program settings reduces the POST execution time. • • In the Boot Menu, set the hard disk drive as the first boot device. As a result, the POST does not first seek a diskette drive, which saves about one second from the POST execution time. In the Peripheral Configuration submenu, disable the LAN device if it will not be used. This can reduce up to four seconds of option ROM boot time.
Intel Desktop Board D201GLY Technical Product Specification 3.9 BIOS Security Features The BIOS includes security features that restrict access to the BIOS Setup program and who can boot the computer. A supervisor password and a user password can be set for the BIOS Setup program and for booting the computer, with the following restrictions: • • • • • • • The supervisor password gives unrestricted access to view and change all the Setup options in the BIOS Setup program. This is the supervisor mode.
4 Error Messages What This Chapter Contains 4.1 BIOS Front-panel Power LED Codes.................................................... 71 4.2 BIOS Error Messages ....................................................................... 71 4.3 Port 80h POST Codes ....................................................................... 72 4.1 BIOS Front-panel Power LED Codes The front-panel power LED blinks off and on to display messages.
Intel Desktop Board D201GLY Technical Product Specification 4.3 Port 80h POST Codes During the POST, the BIOS generates diagnostic progress codes (POST codes) to I/O port 80h. If the POST fails, execution stops and the last POST code generated is left at port 80h. This code is useful for determining the point where an error occurred. Displaying the POST codes requires a PCI bus add-in card, often called a POST card.
Error Messages Table 36.
Intel Desktop Board D201GLY Technical Product Specification Table 36.
Error Messages Table 36.
Intel Desktop Board D201GLY Technical Product Specification Table 37.
