Datasheet

Intel Desktop Board D101GGC Technical Product Specification
10
1.1 Overview
1.1.1 Feature Summary
Table 1 summarizes the major features of the board.
Table 1. Feature Summary
Form Factor
microATX (9.60 inches by 8.60 inches [243.84 millimeters by 218.44 millimeters])
Processor
Support for the following:
• Intel
®
Pentium
®
4 processor in an LGA775 socket with an 800 or 533 MHz
system bus
• Intel
®
Celeron
®
D processor in an LGA775 socket with a 533 MHz system bus
Memory
• Two DDR SDRAM Dual Inline Memory Module (DIMM) sockets
• Support for DDR 400 MHz and DDR 333 MHz DIMMs
• Support for up to 2 GB of system memory
Chipset
• ATI Radeon* Xpress 200 Northbridge
• ATI IXP 450 Southbridge
• 4 Mbit Firmware Hub (FWH)
Video
ATI Radeon Xpress 200 Northbridge
Audio
High Definition Audio subsystem using the Realtek ALC861 audio codec
Legacy I/O Control
SMSC SCH5017 Legacy I/O controller for hardware management, diskette drive,
serial, parallel, and PS/2* ports
USB
Support for USB 2.0 devices
Peripheral
Interfaces
• Eight USB ports
• One serial port
• One parallel port
• Four Serial ATA interfaces
• Two Parallel ATA IDE interfaces with UDMA 33, ATA-66/100 support
• One diskette drive interface
• PS/2 keyboard and mouse ports
LAN Support
10/100 Mbits/sec LAN subsystem using the Realtek 8101L LAN adapter device
BIOS
AwardBIOS* for Intel
®
resident in the 4 Mbit FWH
Expansion
Capabilities
• Two PCI Conventional* bus connectors
• One PCI Express* x1 bus add-in card connector
• One PCI Express x16 bus add-in card connector
Instantly Available
PC Technology
• Support for PCI Local Bus Specification Revision 2.2
• Support for PCI Express Revision 1.0a
• Suspend to RAM support
• Wake on PCI, RS-232, front panel, PS/2 devices, and USB ports
Hardware Monitor
Subsystem
(controlled by SMSC
SCH5017 I/O
controller)
• Voltage sense to detect out of range power supply voltages
• Thermal sense to detect out of range thermal values
• Three fan connectors
• Three fan sense inputs used to monitor fan activity
• Fan speed control
For information about Refer to
Available configurations for the Desktop Board D101GGC Section 1.2, page 14