Datasheet

Front Panel Assembly 1U Server Chassis SR1300
Revision 1.2
Intel order number A94544-004
20
5. Front Panel Assembly
5.1 Front Panel Buttons and Intrusion Switch
The server chassis SR1300 front panel assembly houses several system control buttons and a
chassis intrusion switch. Each of their functions is listed in the following table.
Figure 16. Front Panel Assembly
Table 12. Control Button and Intrusion Switch Functions
Feature Function
Power/Sleep Button Toggles the system power on/off. This button is also used as a sleep button for
operating systems that follow the ACPI specification
Reset button Reboots and initializes the system
NMI button Pressing the recessed button with a paper clip or pin puts the server in a halt state for
diagnostic purposes and allows the system to issue a non-maskable interrupt. After
issuing the interrupt, a memory download can be performed to determine the cause of
the problem
ID button Toggles the front panel ID LED and the baseboard ID LED on/off. The baseboard ID
LED is visible through the rear of the chassis and allows you to locate the server you’re
working on from behind a rack of servers
Chassis Intrusion Switch A chassis intrusion switch is located on the front panel board