Datasheet

1U Server Chassis SR1300 Chassis Peripheral Bays

Revision 1.2

Intel order number A94544-004

4. Chassis Peripheral Bays

The server chassis SR1300 provides two drive bays and one flex bay at the front of the chassis.

In SCSI configurations, all three drive bays may be populated with a tray-mounted 3.5” Single

Connector Attachment (SCA) SCSI hard disk drive. If a configuration requires the use of a

floppy disk drive and CDROM or DVDROM drive, an optional Floppy/CDROM or

Floppy/DVDROM module may be used in place of the third hard drive in the flex bay.

In ATA configurations, the chassis will support up to two tray-mounted 3.5” ATA drives in the

first two bays, and the optional Floppy/CDROM or Floppy/DVDROM module in the flex bay.

A Hard drive bays

B Flex bay

C Slimline DVD/CD-ROM drive/FDD module

D Hard disk drive (Only in SCSI Backplane configurations)

E Hard disk drive

Figure 13. SR1300 Peripheral Bay Configuration Options