Datasheet

Power Sub-system 1U Server Chassis SR1300
Revision 1.2
Intel order number A94544-004
12
Table 7. Power Supply Input/Output Summary
Voltage Current Rating
+3.3 VDC Output 16.0A Max
+5 VDC Output 12.0A Max
+12 V1DC Output
16.0A Max
1
(18.0A peak
2
)
+12 V2DC Output
16.0A Max
1
(18.0A peak
2
)
-12 VDC Output 0.5A
+5 VDC Standby 2.0A
Output balancing Total combined output power of all output shall not exceed 350 W
AC Line Voltage Auto-ranging for either 90-132 VAC or 180-264 VAC
AC Line Frequency 50/60 Hz
AC Input Current 4.96 Amp at 115 VAC. 2.48 Amp at 220 VAC
Notes:
1. Maximum continuous load on the combined 12V output shall not exceed 28A
2. Peak power and peak current loading shall be supported for a minimum of 12 seconds
2.2.1 Power Supply Mechanical Specifications
The approximate power supply dimensions are 40.0mm high X 106mm wide X 300.0mm deep.
The mechanical outline and dimensions are shown in the following figure.
Apparaten skall anslutas
till jordat uttag när den
ansluts till ett nätverk
Must connect to an earthed
mains s ocket-out let
Figure 10. Outline Drawing Power System Enclosure 70-pin