Datasheet

32 Intel
®
Pentium
®
4 Processor on 0.13 Micron Process Datasheet
Electrical Specifications
.
NOTES:
1. Unless otherwise noted, all specifications in this table apply to all processor frequencies.
2. V
IL
is defined as the maximum voltage level at a receiving agent that will be interpreted as a logical low value.
3. V
IH
is defined as the minimum voltage level at a receiving agent that will be interpreted as a logical high
value.
4. Refer to processor I/O Buffer Models for I/V characteristics.
5. The V
CC
referred to in these specifications is the instantaneous V
CC
.
6. Vol max of 0.450 V is guaranteed when driving into a test load of 50
Ω as indicated in Figure 2-7.
7. Leakage to V
SS
with pin held at V
CC
.
8. Leakage to V
CC
with Pin held at 300 mV.
9. R
ON
value is defined for a platform that is forward compatible with future processors.
10.GTLREF value is defined for a platform that is forward compatible with future processors.
NOTES:
1. Unless otherwise noted, all specifications in this table apply to all processor frequencies.
2. All outputs are open-drain.
3. The V
CC
referred to in these specifications refers to instantaneous V
CC
.
4. This specification applies to the asynchronous GTL+ signal group.
5. The maximum output current is based on maximum current handling capability of the buffer and is not
specified into the test load shown in Figure 2-7.
6. Refer to the processor I/O Buffer Models for I/V characteristics.
7. Vol max of 0.270 Volts is guaranteed when driving into a test load of 50
Ω as indicated in Figure 2-7 for the
Asynchronous GTL+ signals.
8. Leakage to V
SS
with pin held at V
CC
.
9. Leakage to V
CC
with Pin held at 300 mV.
10.R
ON
value is defined for a platform that is forward compatible with future processors.
Table 2-9. AGTL+ Signal Group DC Specifications
Symbol Parameter Min Max Unit Notes
1
GTLREF Reference Voltage 2/3 V
CC
– 2% 2/3 V
CC
+ 2% V
GTLREF
Compatible
Reference Voltage 0.63 V
CC
– 2% 0.63 V
CC
+2% V 10
V
IH
Input High Voltage 1.10*GTLREF V
CC
V2,5
V
IL
Input Low Voltage 0.0 0.9*GTLREF V 3,5
V
OH
Output High Voltage N/A V
CC
V6
I
OL
Output Low Current N/A 50 mA 5
I
HI
Pin Leakage High N/A 100 µA 7
I
LO
Pin Leakage Low N/A 500 µA 8
R
ON
Buffer On Resistance 7 11 Ω 4
R
ON
Compatible
Buffer On Resistance 8.4 13.2
Ω 4, 9
Table 2-10. Asynchronous GTL+ Signal Group DC Specifications
Symbol Parameter Min Max Unit Notes
1
V
IH
Input High Voltage Asynch GTL+ 1.10*GTLREF V
CC
V3, 4
V
IL
Input Low Voltage Asynch GTL+ 0 0.9*GTLREF V 4
V
OH
Output High Voltage V
CC
V2, 3
I
OL
Output Low Current 50 mA 5, 7
I
HI
Pin Leakage High N/A 100 µA 8
I
LO
Pin Leakage Low N/A 500 µA 9
R
on
Buffer On Resistance Asynch GTL+ 7 11 Ω 4,6
R
ON
Compatible
Buffer On Resistance Asynch GTL+ 8.4 13.2
Ω 4,6,10