Datasheet

Electrical Specifications
Datasheet 25
VID[6:0] V
CC
/V
NN
VID[6:0] V
CC
/V
NN
VID[6:0] V
CC
/V
NN
VID[6:0] V
CC
/V
NN
1Ch 1.1500V 3Ch 0.7500V 5Ch 0.3500V 7Ch 0.0000V
1Dh 1.1375V 3Dh 0.7375V 5Dh 0.3375V 7Dh 0.0000V
1Eh 1.1250V 3Eh 0.7250V 5Eh 0.3250V 7Eh 0.0000V
1Fh 1.1125V 3Fh 0.7125V 5Fh 0.3125V 7Fh 0.0000V
4.5 Absolute Maximum Ratings
Table 4-3 specifies absolute maximum and minimum ratings. Within functional
operation limits, functionality and long-term reliability can be expected.
At conditions outside functional operation condition limits, but within absolute
maximum and minimum ratings, neither functionality nor long term reliability can be
expected. If a device is returned to conditions within functional operation limits after
having been subjected to conditions outside these limits, but within the absolute
maximum and minimum ratings, the device may be functional, but with its lifetime
degraded depending on exposure to conditions exceeding the functional operation
condition limits.
At conditions exceeding absolute maximum and minimum ratings, neither functionality
nor long term reliability can be expected. Moreover, if a device is subjected to these
conditions for any length of time, then when returned to conditions within the
functional operating condition limits, it will either not function or its reliability will be
severely degraded.
Although the processor contains protective circuitry to resist damage from static
electric discharge, precautions should always be taken to avoid high static voltages or
electric fields.
Table 4-3. Absolute Maximum Ratings
Symbol Parameter Minimum Maximum Unit Note
V
CC
Processor core supply voltage -0.3 1.1 V
V
NN
North Complex logic and GFX supply
voltage
-0.3 0.95 V
V
CCP
/V
CCQ
cDMI, cDVO, LGI, LGIe -0.3 1.1 V
V
CCPDDR
1.05-V DDR2 DLL and logic supply
voltage
-0.3 1.1 V
V
CCPAOAC
1.05-V JTAG, C6 SRAM -0.3 1.1 V
V
MM
1.2-V I/O supply voltage -0.3 1.25 V
LVD_VBG 1.25-V LVDS band gap supply voltage -0.1 1.28 V
V
CCA
1.5-V HPLL analog PLL and thermal
sensor supply voltage
-0.3 1.575 V
V
CCA180
1.8-V LVDS analog supply voltage -0.3 1.9 V