Intel® RAID Smart Battery AXXRSBBU3 Installation Guide Order Number: C95291-005
Disclaimer Information in this document is provided in connection with Intel® products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document.
Important Safety Instructions Important Safety Instructions Read all caution and safety statements in this document before performing any of the instructions. See Intel Server Boards and Server Chassis Safety Information at http://support.intel.com/support/motherboards/server/sb/cs-010770.htm. Wichtige Sicherheitshinweise Lesen Sie zunächst sämtliche Warn- und Sicherheitshinweise in diesem Dokument, bevor Sie eine der Anweisungen ausführen.
WARNINGS Server power on/off: The push-button on/off power switch on the front panel of the server does not turn off the AC power. To remove AC power from the server, you must unplug the AC power cord from either the power supply or wall outlet. Hazardous conditions—power supply: Hazardous voltage, current, and energy levels are present inside the power supply enclosure. There are no user-serviceable parts inside it; servicing should only be done by technically qualified personnel.
Contents About the Intel® RAID Smart Battery ................................................................. 1 Installing the Hardware....................................................................................... 2 Prepare the Server.................................................................................................................. 2 ® Install the Intel RAID Smart Battery .......................................................................................
vi Intel® RAID Smart Battery Installation Guide
About the Intel® RAID Smart Battery ® ® Intel RAID Controllers and Intel Integrated Server RAID Modules provide reliability, high performance, and fault-tolerant disk subsystem management. A complete fault-tolerant strategy requires protection for all data, including the unwritten cached data in the RAM cache. If power is lost, the data in RAM is lost. To avoid this data loss, a battery can be added to supply power to the RAID RAM during an AC power outage or if the AC power cord is removed.
Installing the Hardware Prepare the Server 1. Observe all safety and ESD precautions at the beginning of this guide and in the documentation for your server board and chassis. 2. If your server system is running, power off all peripheral devices attached to the server, power down the server, and disconnect the AC power cord from the server. 3. Remove the chassis cover. See your server chassis documentation for instructions. Install the Intel® RAID Smart Battery Connect the Battery Cable 1.
A C D B AF000482 Figure 1. Connecting Battery Cable Connect the Clamshell to the Chassis ® ® The Intel RAID Smart Battery SXXRSBBU3 is designed for easy attachment to either an Intel pedestal or rack chassis. Follow the set of instructions below that is appropriate for your server. If you are installing this component into a third-party chassis, you will first need to install an attachment mechanism, such as industrial-grade Velcro*.
® ® ® Intel Server Chassis SC5400, Intel Entry Server Chassis SC5299-E, Intel Server Platforms SR4850HW4, SR6850HW4, SR4850HW4/M, and SR6850HW4/M 1. Locate the installation clips inside the chassis. They are at the left side of the chassis, near the rear. 2. Align the tabs on the clamshell with the slots on the chassis. TP01407 Figure 2. Aligning Tabs to Slots 3. Slide the clamshell toward the front of the system until the tabs engage in the chassis (see Figure 3). TP01408 Figure 3.
® Intel Server Platforms SR1550AL and SR2500AL 1. Clips are located on the inside floor of the chassis, at the left side, near the front of the chassis, near the power supply. 2. Align the tabs on the clamshell with the slots on the chassis. 3. Slide the clamshell toward the rear of the system until the tabs engage in the chassis (see Figure 4). AF000480 Figure 4.
Attach the Connecting Cable to the Server System Follow the set of instructions below that is appropriate for your server. Note: The connector will only fit in one position. ® Intel Server Platforms SR4850HW4 and SR6850HW4 (SCSI ROMB) 1. Route the cable through the cable holder as shown by Letter “A” of Figure 5. 2. Connect the cable to the main board, as shown below. A B TP01409 Figure 5.
® Intel Server Platforms SR1550AL and SR2500AL Connect the cable to the midplane SAS ROMB board as shown below. AF000483 Figure 7. Routing and Connecting the Cable inside the Chassis Finish Up the Hardware 1. Reinstall any components inside of the server chassis that you needed to remove. See your server board or chassis documentation for instructions. 2. Install the server chassis cover and connect the AC power supply.
