Specifications

Intel® Remote Management Module 3 Network Connections and Authentication
Revision 1.1
Intel order number E63789-002
15
5. Network Connections and Authentication
5.1 Network Connectivity
The Intel
®
RMM3 requires Ethernet connectivity. Therefore, an Ethernet PHY is installed on the
Intel
®
RMM3. This enables the Intel
®
RMM3 to manage these network functions:
 Dynamic Host Configuration Protocol (DHCP)
 Address Resolution Protocol (ARP)
 Internet Control Message Protocol (ICMP)
 TCP/IP
5.1.1 Supported Traffic
All Intel
®
RMM3 Virtual Presence features (Web GUI, Virtual Media, etc.) are supported on the
dedicated 10/100 Ethernet interface. IPMI traffic to the Integrated BMC-shared NIC connections
and via the Intel
®
RMM3 is only supported if the Integrated BMC-shared NIC and the Intel
®
RMM3 NIC are on separate subnets .
Intel® RMM3 Lite has no dedicated NIC. User only can access its Virtual Presence features via
the Integrated BMC-shared NIC (NIC5 on Intel® S3420GPRX).
Intel® RMM3 Lite-V dedicated NIC is separated and integrated on Intel® Server System
SR1640TH server board. All Virtual Presence features are supported on Integrated BMC-shared
NIC and RMM3 Lite-V dedicated NIC.
IPMI traffic to those two network paths is only supported if
the Integrated BMC-shared NIC and the Intel
®
RMM3 Lite-V dedicated NIC are on separate
subnets
.