Datasheet

Rail Kit Install Guide: Intel® Modular Server System MFSYS25 1
Rail Kit Install Guide
The Intel® Modular Server System MFSYS25 is designed to support cabinets that are 19
inches (483 mm) wide by up to 36 inches (914 mm) deep. A set of rack mounting rails is
provided in this kit and will accommodate either square or round hole rack-mounting
methods.
Kit Contents
Rail Kit Installation Instructions
Prepare System
Warning: Lifting the system and attaching it to the rack is a three-person operation. Remove all
modules from the system prior to lifting system into rack. This includes all compute server
modules, all power supply modules, all Ethernet switch modules, all storage controllers
and the management module. Use of a mechanical assist is required if modules are not
removed.
1. Read all caution and safety statements listed in this document before performing any
of the steps. See the Intel® Server Boards and Server Chassis Safety Information
document at http://support.intel.com/support/motherboards/server/sb/cs-010770.htm
for a complete listing of all caution and safety statements.
Caution: Before performing any maintenance on the system, back up the data.
2. Turn off all peripheral devices connected to the system. Turn off the system.
3. Disconnect the power cord(s).
Rail Kit (AXXMFRAIL)
Item Quantity
Rail 2
Install Guide 1