Rail Kit Install Guide: Intel® Modular Server System MFSYS25 A Guide for Technically Qualified Assemblers of Intel® Identified Subassemblies/ Products Intel Order Number: E12567-002
Disclaimer Information in this document is provided in connection with Intel® products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document.
Safety Information Important Safety Instructions Read all caution and safety statements in this document before performing any of the instructions. See also Intel Server Boards and Server Chassis Safety Information on the Intel® Server Deployment Toolkit CD and/or at http://support.intel.com/support/ motherboards/server/sb/cs-010770.htm. Wichtige Sicherheitshinweise Lesen Sie zunächst sämtliche Warnund Sicherheitshinweise in diesem Dokument, bevor Sie eine der Anweisungen ausführen.
Warnings Heed safety instructions: Before working with your server product, whether you are using this guide or any other resource as a reference, pay close attention to the safety instructions. You must adhere to the assembly instructions in this guide to ensure and maintain compliance with existing product certifications and approvals. Use only the described, regulated components specified in this guide.
Contents Safety Information ..................................................................................................... iii Important Safety Instructions ................................................................................................ iii Wichtige Sicherheitshinweise ............................................................................................... iii Consignes de sécurité ................................................................................................
vi Rail Kit Install Guide: Intel® Modular Server System MFSYS25
Rail Kit Install Guide The Intel® Modular Server System MFSYS25 is designed to support cabinets that are 19 inches (483 mm) wide by up to 36 inches (914 mm) deep. A set of rack mounting rails is provided in this kit and will accommodate either square or round hole rack-mounting methods. Kit Contents Rail Kit Installation Instructions Rail Kit (AXXMFRAIL) Item Quantity Rail 2 Install Guide 1 Prepare System Warning: Lifting the system and attaching it to the rack is a three-person operation.
Prepare Rack Setting the Multi-pin Adapters for Rack Type The multi-pin adapters allow the rack rails to be used in racks that have either square or round mounting holes. Note: The rack rails ship with the multi-pin adapters set for square holes. If your rack has square mounting holes, skip this section. 4. On each rack rail, reverse the multi-pin adapter position so that it matches the appropriate rack mounting hole type for your rack.
5. To set for round mounting holes, remove the multi-pin adapter by rotating the swivel lock up (see letter “A” in the following figure). Press and hold the top (floating) mounting pin downward (see letter “B”) while extracting the middle and bottom pins from the multi-pin bracket. B A AF002463 Figure 2. Removing Multi-pin Adapter from Multi-pin Bracket 6. Set the multi-pin adapter for round mounting holes (see Figure 1).
7. Ensure the swivel lock is up (see letter “A” in the following figure). Re-install the multi-pin adapter into the multi-pin bracket by placing the bottom mounting pin fully in the bracket. Press and hold the top (floating) pin (see letter “B”) while pushing the adapter into the bracket. Ensure that all three mounting pins on the multi-pin adapter are fully engaged in the multi-pin bracket. The multi-pin adapter must be fully locked into the bracket.
Installing Rack Rails into Rack Hole (or similar mark) in rack upright identifies top-most mounting hole for each 1 RU position 1 RU 1 RU 9. For all four rack uprights, determine the vertical position in the rack at which the rack rails are to be installed. The top-most mounting hole for a particular rack unit (RU) mounting position is typically identified by a mark or hole. AF002465 Figure 4.
I Engage the lowest pin first in rack upright. Then press and hold top (floating) pin downward while inserting rack rail with adapter into rack upright mounting holes. CORRECT • Multi-pin adapter pins are fully engaged in the rack holes. INCORRECT • Multi-pin adapter pins are not fully engaged in the rack holes. INCORRECT • Top rack hole selected is not designated top-of-RU hole. • Top rack hole selected is designated top-of-RU hole. AF002466 Figure 5. Attaching Rack Rail to Multi-pin Bracket 12.
Install System in Rack Warning: Lifting the system and attaching it to the rack is a three-person operation. Remove all modules from the system prior to lifting system into rack. This includes all compute server modules, all power supply modules, all Ethernet switch modules, all storage controllers and the management module. Use of a mechanical assist is required if modules are not removed. 14. Lift and align system with the mounted rack rails.
8 Rail Kit Install Guide: Intel® Modular Server System MFSYS25
