Specifications

Regulatory Information
regs.htm[8/25/2022 4:59:25 PM]
This equipment complies with the essential requirements of the European Union directive 2014/53/EU.
INFORMATION FOR OEMS and HOST INTEGRATORS
The guidelines described within this document are provided to OEM integrators installing Intel® wireless adapters in notebook and tablet PC host platforms. Adherence to
these requirements is necessary to meet the conditions of compliance with FCC rules, including RF exposure. When all antenna type and placement guidelines described
herein are fulfilled the Intel® wireless adapters may be incorporated into notebook and tablet PC host platforms with no further restrictions. If any of the guidelines
described herein are not satisfied it may be necessary for the OEM or integrator to perform additional testing and/or obtain additional approval. The OEM or integrator is
responsible to determine the required host regulatory testing and/or obtaining the required host approvals for compliance. If needed, please contact the applicant/grantee
(Intel) regarding detailed information on how to setup the device for any compliance testing that the OEM integrator is responsible per KDB 996369 D04.
Intel® wireless adapters are intended for OEMs and host integrators only.
The Intel® wireless adapter FCC Grant of Authorization describes any limited conditions of modular approval.
The Intel® wireless adapters must be operated with an access point that has been approved for the country of operation.
Changes or modification to Intel® wireless adapters by OEMs, integrators or other third parties is not permitted. Any changes or modification to Intel® wireless
adapters by OEMs, integrators or other third parties will void authorization to operate the adapter.
Antenna Type and Gains
Only antennas of the same type and with equal or less gains as 3dBi for the 2.4GHz band and 5dBi for the 5GHz band shall be used with the Intel® wireless adapters. Other
types of antennas and/or higher gain antennas may require additional authorization for operation. For testing purposes the following dual band antenna that approximates
closely the above limits was used:
Antenna
Type
Antenna
Location
(Main/Aux)
2.4GHz
Peak Gain
in dBi*
5.2GHz
Peak Gain
in dBi*
5.5GHz
Peak Gain
in dBi*
5.7GHz
Peak Gain
in dBi*
6.2GHz
Peak Gain
in dBi*
6.5GHz
Peak Gain in
dBi*
6.7GHz
Peak Gain in
dBi*
7GHz Peak
Gain in
dBi*
PIFA Main
Aux 3.24 3.73 4.77 4.77 4.83 4.30 5.37 5.59
MIMO
Antenna Type and Gains for AX211D2WH Only
Antenna
Type
Antenna
Location
(Main/Aux)
2.4GHz
Peak
Gain in
dBi*
2.43GHz
Peak
Gain in
dBi*
2.47GHz
Peak
Gain in
dBi*
2.483GHz
Peak
Gain in
dBi*
5.2GHz
Peak
Gain in
dBi*
5.4GHz
Peak
Gain in
dBi*
5.6GHz
Peak
Gain in
dBi*
5.8GHz
Peak
Gain in
dBi*
6.2GHz
Peak
Gain in
dBi*
6.5GHz
Peak
Gain in
dBi*
6.6GHz
Peak
Gain in
dBi*
7GHz
Peak
Gain
in
dBi*
PIFA Main/Aux 5.99 6.23 6.4 6.15 8 8.07 8.19 8.39 7.88 8.1 7.75 8.08
*All antenna gains include cable loss.