Specifications

Regulatory Information
regs.htm[5/25/2022 10:26:48 AM]
Intel® Wi-Fi 6 AX201 (AX201D2WL) 15 mm
Intel® Wi-Fi 6 AX201 (AX201NGW) 17 mm
Intel® Wi-Fi 6E AX203 (AX203NGW) 18 mm
Intel® Wi-Fi 6E AX203 (AX203D2W) 16 mm
Intel® Wi-Fi 6E AX204 (AX204NGW) 14 mm
Intel® Wi-Fi 6E AX204 (AX204D2W) 19 mm
Intel® Wi-Fi 6E AX210 (AX210NGW) 13 mm
Intel® Wi-Fi 6E AX210 (AX210D2W) 17 mm
Intel® Wi-Fi 6E AX211 (AX211NGW) 14 mm
Intel® Wi-Fi 6E AX211 (AX211D2W) 14 mm
Intel® Wi-Fi 6E AX211 (AX211D2WH) 14 mm
Intel® Wi-Fi 6E AX211 (AX211D2WL) 15 mm
Intel® Wi-Fi 6E AX411 (AX411NGW) 15 mm
Intel® Wi-Fi 6E AX411 (AX411E2W) 15 mm
* This wireless adapter may be installed in mobile devices only (requires > 20 cm antenna separation from the
body of user).
Additional regulatory authorization process may be required if wishing to place the 60 GHz/802.11ad RFEM (antenna
array) closer than 20 cm to the user.
Information To Be Supplied to the End User by the OEM or Integrator
The following regulatory and safety notices must be published in documentation supplied to the end user of the
product or system incorporating the Intel® wireless adapter, in compliance with local regulations. Host system must
be labeled with "Contains FCC ID: XXXXXXXX", FCC ID displayed on label.
The wireless adapter must be installed and used in strict accordance with the manufacturer's instructions as
described in the user documentation that comes with the product. For country-specific approvals, see Radio
Approvals. Intel Corporation is not responsible for any radio or television interference caused by unauthorized
modification of the devices included with the wireless adapter kit or the substitution or attachment of connecting
cables and equipment other than that specified by Intel Corporation. The correction of interference caused by such
unauthorized modification, substitution or attachment is the responsibility of the user. Intel Corporation and
authorized resellers or distributors are not liable for any damage or violation of government regulations that may
arise from the user failing to comply with these guidelines.
China:
模块通
过
型号核准并不代表嵌入或使用
该
模块的最
终设
备符合相
关
无
线电
管理技
术规
定或
标
准 最
终设
备厂商
须对产
品的技
术
特性是否
符合无
线电
管理技
术规
定或
标
准
负责
Local Restriction of 802.11a, 802.11b, 802.11g, 802.11n, and 802.11ad Radio Usage
The following statement on local restrictions must be published as part of the compliance documentation for all
802.11a, 802.11b, 802.11g, 802.11n, and 802.11ad products.
Caution: Due to the fact that the frequencies used by 802.11a, 802.11b, 802.11g, 802.11n, and 802.11ad
wireless LAN devices may not yet be harmonized in all countries, 802.11a, 802.11b, 802.11g and 802.11n products
are designed for use only in specific countries, and are not allowed to be operated in countries other than those of
designated use. As a user of these products, you are responsible for ensuring that the products are used only in the
countries for which they were intended and for verifying that they are configured with the correct selection of
frequency and channel for the country of use. Any deviation from permissible settings and restrictions in the country
of use could be an infringement of national law and may be punished as such.