Specifications

Regulatory Information
regs.htm[5/25/2022 10:26:48 AM]
Due to the very small size of the AX411E2W, the marking has been placed in this user manual because the product
label on the device is considered too small to be readable.
USA:
Model AX411E2W
FCC ID: PD9AX411E2
Canada:
Model AX411E2W
IC: 1000M-AX411E2
Europe:
Model AX411E2W
Software Version Intel® PROSet/Wireless WiFi Software 22.x and subsequent
versions
Maximum Power Output
(2400 - 2483.5 MHz)
IEEE802.11 b/g/n/ax
mode
Bluetooth
20dBm EIRP max (100mW)
(2400 - 2483.5 MHz)
BLE
10dBm EIRP max (10mW)
(5150 - 5725 MHz)
IEEE802.11
a/n/ac/ax mode
23dBm EIRP max (200mW)
The low band 5.15 - 5.35 GHz is for indoor use only
(5725 - 5875 MHz)
IEEE802.11
a/n/ac/ax mode
13.98 dBm EIRP Max (25mW)
For the standard EN 300 440, the device operating in 5.8 GHz is considered
a category 2 receiver
(5925 - 6425 MHz)
IEEE802.11ax
23 dBm EIRP max (200mW)
The band 5.925 - 6.425GHz is for LPI (Low Power in-door)
This equipment complies with the essential requirements of the European Union directive 2014/53/EU.
INFORMATION FOR OEMS and HOST INTEGRATORS
The guidelines described within this document are provided to OEM integrators installing Intel® wireless adapters in
notebook and tablet PC host platforms. Adherence to these requirements is necessary to meet the conditions of
compliance with FCC rules, including RF exposure. When all antenna type and placement guidelines described herein
are fulfilled the Intel® wireless adapters may be incorporated into notebook and tablet PC host platforms with no
further restrictions. If any of the guidelines described herein are not satisfied it may be necessary for the OEM or
integrator to perform additional testing and/or obtain additional approval. The OEM or integrator is responsible to
determine the required host regulatory testing and/or obtaining the required host approvals for compliance.
If needed please contact the applicant/grantee (Intel) regarding detailed information on how to setup the device for
any compliance testing that the OEM integrator is responsible per KDB 996369 D04.
Intel® wireless adapters are intended for OEMs and host integrators only.