Installation Instructions

ManualsBrandsIntel ManualsElectronicsIntel Wireless - AX201

TheinformationprovidedinthisdocumentappliestothefollowingIntelWirelessAdapterModules.

Model FCCID

AX201NGW

PD9AX201NG

SoftwareSecurityDescription–KDB594280D02v01r03SectionII

GeneralDescription



1. Describehowanysoftware/firmwareupdatewillbe

obtained,downloaded,andinstalled.Softwarethatis

accessedthroughmanufacturer’swebsiteordevice’s

managementsystem,mustdescribethedifferentlevels

ofsecurityasappropriate.

There is no downloadable software provided by the

manufacturer that can modify critical radio transmitter

parameters. All critical parameters are programmed in

OTP memory at the factory and cannot be modified or

overridden by third parties.

2. Describetherfparametersthataremodifiedbyany

software/firmwarewithoutanyhardwarechanges.Are

theseparametersinsomewaylimited,suchthat,itwill

notexceedtheauthorizedRFcharacteristics?

There are no rf parameters that can be modified. All rf

parameters are programmed in OTP memory at the

factory and cannot be modified or overridden by third

parties.

3. Describeindetailtheauthenticationprotocolsthat

areinplacetoensurethatthesourceoftheRFrelated

software/firmwareislegitimate.Describeindetailhow

thesoftwareisprotectedagainstmodification.

The firmware is programmed at the factory and cannot

be modified by third parties.

4. Describeindetailanyencryptionmethodsusedto

supporttheuseoflegitimateRF

relatedsoftware/firmware.

The firmware is programmed at the factory and cannot

be modified by third parties therefore no encryption is

necessary.

5. Foradevicethatcanbeconfiguredasamasterand

client(withactiveorpassivescanning),explainhowthe

deviceensurescomplianceforeachmode?Inparticular

ifthedeviceactsasmasterinsomebandofoperation

andclientinanother;howiscomplianceensuredin

eachbandofoperation?

his is a

client module only.

Third‐Pa

yAccessControl

1. Explainifanythirdpartieshavethecapabilityto

operateaUSsolddeviceonanyotherregulatory

domain,frequencies,orinanymannerthatisin

Third parties do not the capability to operate in any

manner that is violation of the certification in the U.S.

Summary of content (3 pages)

PAGE 1
The information provided in this document applies to the following Intel Wireless Adapter Modules. Model FCC ID AX201NGW PD9AX201NG Software Security Description – KDB 594280 D02v01r03 Section II General Description 1. Describe how any software/firmware update will be obtained, downloaded, and installed. Software that is accessed through manufacturer’s website or device’s management system, must describe the different levels of security as appropriate.
PAGE 2
violation of the device’s authorization if activated in the U.S.. 2. Describe, if the device permits third‐party software or RF parameters are programmed into OTP memory at the firmware installation, what mechanisms are provided by factory and cannot be reprogrammed or re-flashed by third parties. the manufacturer to permit integration of such functions while ensuring that the RF parameters of the device cannot be operated outside its authorization for operation in the U.S.
PAGE 3
the installers will not enter parameters that exceed those authorized? module OTP memory. These parameters cannot be modified or overridden by sw drivers. ii) What controls exist that the user cannot operate Default mode is always FCC compliant. Other country modes cannot be activated without receiving three the device outside its authorization in the U.S.