User Manual PH4AUX2 PH4ARX2 PH4AQE2 PH4AQF2
Notice The information in this user’s manual is protected by copyright laws, all parts of this manual, including the products and software described in it, can not be reproduced, transmitted, transcribed, stored in a retrieval system, nor translated into any language. THE MANUFACTURER OR RESELLER SHALL NOT BE LIABLE FOR ERRORS OR OMISSIONS CONTAINED IN THIS MANUAL AND SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL DAMAGES, WHICH MAY RESULT FROM THE PERFORMANCE OR USE OF THIS MANUAL.
TABLE OF CONTENTS Notice....................................................................................................... 2 Preface..................................................................................................... 5 1.1 Regulations Information..................................................................... 6 1.2 Safety Instructions............................................................................ 10 1.3 Conventions for this Manual......................................
.1 About BIOS Setup............................................................................ 35 4.1.1 When to Use BIOS Setup ?........................................................... 35 4.1.2 How to Run BIOS Setup ?............................................................. 35 4.2 BIOS Setup Menu............................................................................ 36 4.2.1 Main Menu..................................................................................... 37 4.2.2 Advanced Menu ..
Chapter 1 Preface Notebook Manual 5
1.1 Regulations Information ¤ CE compliance This device is classed as a technical information equipment (ITE) in class B and is intended for use in living room and office. The CE-mark approves the conformity by the EU-guidelines: - EMC Directive 2014/30/EU, - Low Voltage Directive 2014/35/EU(equals A2 : 2013) , - RF Directive 2014/53/EU SAR/DAS refers to the rate at which the body absorbs RF energy. The SAR limit set by the ICNIRP Guidelines is 2.0 W/kg(10g).
Rechargeable Battery Notice Do not 1. Throw into fire or a hot oven, or mechanically crush or cutting of a BATTERY 2.Throw or immerse into water 3.Heat to more than 60°C 4.Repaire or disassemble 5.Leave in an extremely low air pressure environment 6.Leave in an extremely high-temperature environment A power cord is connected to a socket-outlet with earthing connection. he unit can be operated at an ambient temperature of max. 35°C (95°F).
FCC Information FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
RF Exposure Information(SAR) This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg.
1.2 Safety Instructions 100k g 1 2 5 4 3 1 Do not apply heavy pressure to the computer or subject it to any form of strong impact as this can damage the computer's components or otherwise cause it to malfunction. 2 Never cover or block the air vents including those located at the base of the computer. Never cover your computer or AC adapter with any object. 3 To keep your computer in prime operating condition, protect your work area from direct sunlight.
1.3 Conventions for this Manual CAUTION : T his message contains important information that must be followed for safe operation. NOTE : This message contains information for special situations.
1.4 Release History Version 1.
Chapter 2 Getting to know the basics Notebook Manual 13
2.1 Product Specification This User’s Manual provides technical information of instructions and illustrations on how to operate this notebook for the customer. Please read this manual carefully before using this notebook. ・Physical Characteristic Dimension 313,9 x 218x 17.1-18.5mm(WUXGA 100%& WQXGA 100%) 313,9 x 218 x 17.7-19.1mm(WUXGA 45%) Weight: (with one fan) 1.3kg+/-0.05 (WUXGA 100%& WQXGA 100%) for PH4AUX2 / PH4ARX2 1.4kg+/-0.05 (WUXGA 45%) for PH4AUX2 / PH4ARX2 1.4kg+/-0.
・I/O Port DC-in x1 USB USB Type A*2: Right: (Gen1)*1 (Power off mode support USB power, & w/bc1.2 protocol ) Left: (Gen1)*1 (Power off mode support USB power, but w/o bc1.2 protocol ) USB Type C *2: Right: TBT4 (only w/ 5V@3A output ) + Type-C Adaptor(40W~100W) Left: USB3.1(Gen2)&w/DP 1.
・Webcam Infrared capability for facial reconition camera IR Camera w/ D-MIC*2 ,4mm HD webcam with D-MIC*1 ,4mm ・Input Keyboard Membrane KB:277*106mm Travel=1.2mm Backlight = Single zone /White Lighting Pointing Device TP glass : 135 * 86 * 1.0T+/- 0.1mm TP PCB : 133 * 84.25 * 0.6T +/- 0.1mm Enable/Disable area :10mm*10mm Palm Rejection:Support ・Communication Port Wireless LAN +BT *M.2 2230 w/ CNVI interface (Intel Wi-Fi 6 AX201) IEEE802.
・Power AC Adapter Automatics Voltage adjustment between 100 and 240VAC 50/60Hz, 65 Watts (19V/3.42A), 3 Pins (PH4AUX2) 90 Watts (19V/4.74A), 3 Pins (PH4ARX2/PH4AQE2/PH4AQF2) Battery Li- polymer Battery, SW Gas Gauge IC, soft pack, 1. 3cells (3s1p/4100mAh) 46Wh 2. 3cells (3s1p/4570mAh) 53Wh(design in for optional) CAUTION: MODEL IS DESIGNED TO USE WITH THE DC INPUT: 65 Watts (19V/3.42A) or 90 Watts (19V/4.
2.2 Preparing your Computer A Connect the AC adapter’s DC output plug to the DC IN jack. B The display panel can be opened to a wide range of angles for optimal viewing. C Press the power button to turn on your notebook computer.
2.3 Product Overview Please become familiar with each component before you operate the computer. Top-Open View NOTE: The product’s color/ LED color, I/O port, indicator location, and specification will depend upon the actually shipping product.
1 2 Camera Status LED The Camera Status LED shows the Camera status. Camera A device that allows you to record video or take photographs with your computer. Infrared capability for facial reconition camera can be used to identify and authenticate user to unlock notebook, conduct payment and other security functions. 3 Microphone Built-in microphones. IR CCD MIC*2 4 LCD screen Displays of your notebook computer. 5 Power Button Press this button to turn the computer's power on or off.
6 Keyboard The keyboard provides keys with comfortable travel (The keyboard legend will depend on the spec / region) 7 Caps Lock Status LED Default: ON (White) 8 Touchpad LED indicator/ Touchpad switch Click twice left corner will open or close touchpad functionality 9 Touchpad/Click pad Touch-sensitive pointing device which functions like the mouse.
Right Side View 1 1 Thunderbolt™4 (USB Type C 3.1) 2 USB Port 2 3 4 Connects an USB device. (such as USB Zip drive, keyboard or mouse) into this jack. Connects an USB device (such as USB Zip drive, keyboard or mouse) into this jack. With charging function. 3 HDMI port 4 Power Connector Connected to the screen, or home theater system. Connects the AC adapter into this connector.
Left Side View 1 1 2 3 4 5 Kensington® Lock Port To be secured using Kensington® Lock Port security products. 2 USB Port (Type C) Connects an USB device. (such as USB Zip drive, keyboard or mouse) into this jack. 3 USB Port 4 Card Reader -USB3 interface, SD/SDHC/SDXC, UHS-I speed Connects an USB device (such as USB Zip drive, keyboard or mouse) into this jack. With charging function.
Bottom Side View NOTE : The product’s thermal vent will depend upon the actually shipping product. 1 2 2 1 Vents 2 Speaker The thermal vents are designed to cool the internal components and avoid overheating. CAUTION: To reduce the possibility of heat-related injuries or of overheating the computer, do not place the computer directly on your lap or obstruct the computer air vents. Use the computer only on a hard, flat surface.
Compartment View NOTE: Specification will depend upon the actually shipping product. PH4AUX2 RAM SSD RAM SSD (option) BATTERY PH4ARX2 PH4AQE2 PH4AQF2 RAM SSD RAM SSD (option) BATTERY If need to upgrade SATA SSD to PCIE SSD, Please contact technical support and after-sales service .
Front Side View Back Side View Notebook Manual 26
Chapter 3 Getting started Notebook Manual 27
3.1 AC Adapter Please be noted that it is strongly recommended to connect the AC adapter and use the AC power while using this notebook for the first time. When the AC adapter is connected, the battery is being charged immediately. Attach the AC adapter when you need to charge the battery or you want to operate from AC power. It is also the fastest way to get started, because the battery pack will need to be charged before you can operate from battery power.
3.2 Knowing the Keyboard The following defines the hot keys on the Keyboard. The commands can only be accessed by first pressing and holding the function key while pressing a key with a command. NOTE: The design of the number of keys available on the keyboard, printing color or backlight depends on the country (region) in which the keyboard was designed and built.in which the keyboard was designed and built.
3.2.1 For keyboard users To activate these functions, press the hot key associated with the desired function as below : Function Keys Keypad Notebook Manual 30 Function Description + Suspend: Press this key combination (Fn+F1) to enter sleep mode. + Windows Lock/On: Press this key combination (Fn+F2) to turn Windows Lock/On . + Display mode: Press this key combination (Fn+F3) to enable Display Mode. + RADIO On/Off: Press this key combination (Fn+F4) to turn all radios on or off.
Function Keys Keypad Function Description Keyboard Brightness down: Press this key combination (Fn+F6) to decrease brightness of Keyboard. + Keyboard Brightness up: Press this key combination (Fn+F7) to increase brightness of Keyboard. + MUTE: Press this key combination (Fn+F8) to enter MUTE mode. + Volume down: Press this key combination (Fn+F9) to enter Volume down mode. + Volume up: Press this key combination (Fn+F10) to enter Volume up mode.
Function Keys + Search Charm : (Optional) For a full list of Windows keyboard shortcuts, please visit the Microsoft official website https://support.microsoft.
3.3 Using the touchpad / clickpad The touchpad / clickpad is a rectangular electronic panel located just below your keyboard. Click twice left corner will open or close (Green light) touchpad functionality.You can use the static-sensitive panel of the touchpad / clickpad and slide it to move the cursor. You can use the buttons below the touchpad as left and right mouse buttons. Press the left 1 and right 2 buttons located on the edge of the touchpad / clickpad to make selections and run functions.
Chapter 4 BIOS setup Notebook Manual 34
4.1 About BIOS Setup 4.1.1 When to Use BIOS Setup ? You may need to run the BIOS Setup when: ・ An error message appears on the screen during the system booting up and is requested to run SETUP. ・ You want to change the default settings for customized features. ・You want to reload the default BIOS settings. 4.1.2 How to Run BIOS Setup ? To run the BIOS Setup Utility, turn on the notebook and press the [Del] key during the POST procedure.
4.2 BIOS Setup Menu Once you enter the BIOS Setup Utility, the Main Menu will appear on the screen. Select the tags to enter the other menus. Main Menu Show system overview about memory size and setting of system time and date. Advanced Menu To select the XD feature enable or disable XD feature only work with Intel platform + Windows. Security Menu Install or clear the password settings for supervisor and user. Boot Menu Configure Settings during System Boot.
4.2.1 Main Menu ・System Time This item allows you to set the system time. There is a small internal (CMOS) battery which is designed to maintain your system clock. It is designed to maintain time even when the PC is powered down or in sleep mode. The time format is [hour:minute:second]. Use [+] or [-] to configure system Time. ・System Date This item allows you to set the system date. The date format is [day:month:date:year]. Use [ENTER], [TAB] or [SHIFT-TAB] to select a field.
Day Day of the week, from Sun to Sat, which is determined by BIOS (read-only). Month (Month) The month from 01 (January) to 12 (December). Date (Date) The date from 01 to 31. Year (Year) The year can be adjusted by users. ・Total Memory This allows you to see the total amount of memory.
4.2.2 Advanced Menu ・Operating system support [UFEI OS] If will support UEFI mode compaatible operating systrems.
・Intel Virtualization Technology When enabled, VMM can take advantage of additional hardware features provided by Vanderpool technology ・Operating mode (Optional) Enable Blance mode/20db mode ・For details of Control center, please refer to the following instructions Notebook Manual 40
4.2.3 Security Menu ・Change Administrator Password When this item is selected, a message box shall appear on the screen as below: Enter New Password Type a maximum of 20-digit password and press [Enter]. The password typed now will replace any previously set password from CMOS memory. You may also press [ESC] to abandon new password setting. It is extremely important to keep record for any BIOS password which is set as it can not be reset even with the removal of a CMOS battery for the security of your PC.
Select Change User Password to give or to abandon password setting same as Change Administrator Password item above. Note that Administrator Password field allows users to enter and change the settings of the BIOS SETUP UTILITY, while User Password field only allows users to enter the BIOS SETUP UTILITY without having the authorization to make any change. The Password Check item is used to specify the type of BIOS password protection that is implemented.
4.2.4 Boot Menu ・Boot Configuration Configure Settings during System Boot. ・Set Boot Priority (1st/2nd/3rd/..... Boot) Specifies the boot sequence from the available devices. A device enclosed in parenthesis has been disabled in the corresponding type menu. ・ Hard Disk Drive / USB HardDisk Drive Specifies the Boot Device Priority sequence.
4.2.5 Exit Menu ・Save Changes and Reset Exit system setup after saving the changes.F4 key can be used for this operation. ・Discard Changes and Exit Exit system setup without saving any changes. ESC key can be used for this operation. ・Restore Defaults Restore/Load Defaults values for all the setup options. F3 key can be used for this operation.
