User's Manual

Notebook Manual 35
 
may vary by models and are subject to change without notice.
4.1 About BIOS Setup
4.1.1 When to Use BIOS Setup ?
4.1.2 How to Run BIOS Setup ?

・ An error message appears on the screen during the system
booting up and is requested to run SETUP.
・ You want to change the default settings for customized
features.
・You want to reload the default BIOS settings.
To run the BIOS Setup Utility, turn on the notebook and press
the [Del] key during the POST procedure.
If the message disappears before you respond and you still wish
to enter Setup, either restart the system by turning it OFF and
ON, or simultaneously pressing [Ctrl]+[Alt]+[Del] keys to restart.
Be noted that the screen snaps and setting options in this
chapter are for your references only.The actual setting screens
󰀨
update.
The setup function only can be invoked by pressing [Del] or
[F2] key during POST that provide a approach to change some

󰀨
system rebooted. The setup uses a menu interface to allow the

as follow.
Press [F7] key for Boot Menu.