User's Guide

Replacement procedure
Note: You might be instructed to slide the keyboard frame forward or backward in some of the following
steps. In this case, ensure that you do not press or hold the keys while sliding the keyboard frame.
Otherwise, the keyboard frame cannot be moved.
1. Disable the built-in battery. See “Disable Fast Startup and the built-in battery” on page 53.
2. Turn off the computer and disconnect the computer from ac power and all connected cables.
3.
Take the tool out of the new keyboard package. Insert the tabs
a and b into the slot between the
TrackPoint buttons and the trackpad
1 . Slightly pivot the tool downward 2 to release the left and right
TrackPoint buttons. Then, remove the two Trackpoint buttons
3 .
4. Loosen the screws that secure the keyboard.
62 L13 and L13 YogaUser Guide