User's Guide

Note: If the background color is red, the sensor cannot detect your head movement.
Use smart pointer
When smart pointer is enabled, you can move the pointer between screens by simply moving your head.
Step 1. Connect an external display and set project mode to Extend.
Note: Smart pointer does not work in duplicate mode.
Step 2. Turn on Smart Pointer on the console of Glance by Mirametrix.
Step 3. Move your head sideways to move the pointer between displays.
Use snap window
When snap window is enabled, you can move application windows between screens.
Step 1. Connect an external display and set project mode to Extend.
Note: Snap window does not work in duplicate mode.
Step 2. Turn on Snap Window on the console of Glance by Mirametrix.
Step 3. Display the application window and make sure it is not maximized or minimized.
Note: Maximized or minimized windows cannot be moved.
Step 4. Holding down the title of the window, move your head sideways to move the application window.
Use Smart Display
Smart Display allows the user to blur monitors not being looked at. Glance constantly monitors the direction
that the user is facing and only unblurs the monitor currently being faced. For monitors that Glance cannot
use, a manual toggle exists to blur and unblur.
Chapter 3. Explore your computer 17