User's Guide

1. Top pen button Hold the button for at least three seconds to enable Bluetooth pairing on the pen.
2. Pen status light
• Continuously blinking white (up to 1 min): Pairing
• Fast blinking white (5 times): Paired
• Solid amber: Charge the pen.
• Blinking amber: Battery power is low.
• Off: The pen is turned off or connected to a computer.
3. Top barrel button To right-click, hold the button and tap the screen in supported applications..
4. Bottom barrel button To erase texts or drawings, hold the button to erase the object in supported
applications.
5. Pen tip To click, tap on the screen with the tip. To double-click, tap twice.
Note: The default function of each button might vary in different apps.
Charge the pen
To charge the pen, connect the pen to a 5 V charger with a USB-C cable.
Pair the Pen
Swift pair
Step 1. Put the pen within a short distance, usually 10 meters (33 feet), from the computer.
Step 2. Press and hold the top pen button for at least 3 seconds.
Step 3. Select Connect when a swift pair notification appears that a new bluetooth device Lenovo E-Color
Pen was found.
Conventional pair
If you do not receive the swift pair notification, you can also do as the following to pair the pen.
Chapter 2. Get started with your computer 17