E15610 First Edition / July 2019 User Guide E15610_UX562FAC_UM_12pages.
Top View NOTE: The keyboard's layout may vary per region or country. The top view may also vary in appearance depending on the Notebook PC model. Array microphones IR Camera 360°-adjustable touch screen panel Numeric keypad Keyboard Touchpad Function key lock indicator Capital lock indicator 2 E15610_UX562FAC_UM_12pages.
I/O ports and slots Status indicators Power button USB 3.1 Gen 1 Type-C™ port Power (DC) input port Headphone/Headset/Microphone jack USB 2.0 port HDMI port MicroSD card slot* USB 3.1 Gen 1 port * On selected models Getting started 1. Charge your Notebook PC A. Connect the DC power connector into your Notebook PC’s power (DC) input port. B. Plug the AC power adapter into a 100V~240V power source.
Safety notices for your Notebook PC WARNING! The bottom of the Notebook PC can get warm to hot while in use or while charging the battery pack. When working on your Notebook PC, do not place it on surfaces that can block the vents. CAUTION! • This Notebook PC should only be used in environments with ambient temperatures between 5°C (41°F) and 35°C (95°F). • Refer to the rating label on the bottom of your Notebook PC and ensure that your power adapter complies with this rating.
Avis concernant les batteries remplaçables • La batterie de l’appareil peut présenter un risque d’incendie ou de brûlure si celle-ci est retirée ou désassemblée. • La batterie et ses composants doivent être recyclés de façon appropriée. Copyright Information You acknowledge that all rights of this Manual remain with ASUS. Any and all rights, including without limitation, in the Manual or website, are and shall remain the exclusive property of ASUS and/or its licensors.
FCC Radio Frequency (RF) Exposure Caution Statement WARNING! Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. To maintain compliance with FCC RF exposure compliance requirements, please avoid direct contact to the transmitting antenna during transmitting.
Declaration of Compliance for Product Environmental Regulation ASUS follows the green design concept to design and manufacture our products, and makes sure that each stage of the product life cycle of ASUS product is in line with global environmental regulations. In addition, ASUS disclose the relevant information based on regulation requirements. Please refer to http://csr.asus.com/Compliance.htm for information disclosure based on regulation requirements ASUS is complied with.
Ecodesign Directive European Union announced a framework for the setting of ecodesign requirements for energyrelated products (2009/125/EC). Specific Implementing Measures are aimed at improving environmental performance of specific products or across multiple product types. ASUS provides product information on the CSR website. Further information could be found at https://csr.asus.com/english/article.aspx?id=1555.
Compliance Statement of Innovation, Science and Economic Development Canada (ISED) This device complies with Innovation, Science and Economic Development Canada license exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Federal Communications Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
RED RF Output table Intel AX201D2W Function WiFi Bluetooth Frequency Maximum Output Power (EIRP) 2412 - 2472 MHz 13 dBm 5150 - 5350 MHz 15 dBm 5470 - 5725 MHz 15 dBm 5725 - 5850 MHz 8 dBm 2402 - 2480 MHz 5 dBm For the standard EN 300 440 V2.1.1, if this device operates in 5725-5875 MHz, it will be considered as a receiver category 2. SA200H Function Frequency H-field strength (at 3 m) Active Stylus 31 KHz 47.63 dBuA/m Notebook PC User Guide E15610_UX562FAC_UM_12pages.
E15610_UX562FAC_UM_12pages.
