User's Guide

6. Turn over the M.2 solid-state drive. Remove the screw  , and then separate the M.2 solid-state drive
from the bracket
 .
7. Install the new M.2 solid-state drive to the bracket  and tighten the screw  .
8. Align the contact edge of the new M.2 solid-state drive with the key in the slot. Then, carefully insert the
drive with the bracket into the slot
 . Tighten the screw  .
9. Reinstall the base cover assembly.
10. Turn over the computer. Connect the ac power adapter and all disconnected cables to the computer.
Chapter 7. CRU replacement 61